Sequential extraction of vanadium and chromium from chromium-bearing vanadium slag through two-stage soda roasting-water leaching

被引:8
作者
Fan, Helin [1 ]
Duan, Huamei [1 ]
He, Wenjie [1 ]
Chen, Dengfu [1 ]
Liu, Tao [1 ]
Long, Mujun [1 ]
Xu, Pei [1 ]
机构
[1] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400044, Peoples R China
关键词
sequential extraction; chromium-bearing; vanadium slag; V-spinel; Cr-spinel; RECOVERY; KINETICS; DECOMPOSITION; TITANIUM; IRON;
D O I
10.1051/metal/2018093
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The sequential extraction of vanadium and chromium from the chromium-bearing vanadium slag through two-stage soda roasting-water leaching was proposed. The precipitation order and thermodynamic stability of Cr-spinel and V-spinel were thoroughly calculated with FactSage 6.3 software. The mechanism of the sequential extraction process is further determined by X-ray diffraction (XRD). Thermodynamic calculations show that the precipitation order of main phases in the chromium-bearing vanadium slag is as follows: Cr-spinel -> V-spinel -> Fe-olivine, while the priority of the reaction between main phases with Na2CO3 follows the order of Fe-olivine -> V-spinel -> Cr-spinel. XRD results reveal that the vanadium-bearing phase in roasted slag is water-soluble NaVO3, while the chromium-bearing phase in roasted slag is Cr-spinel ((Mn, Fe) Cr2O4) and solid solutions ((Fe0.6Cr0.4)(2)O-3) with the soda amount of 21% and temperature of 800 degrees C. The different evolution route of vanadium-bearing phase and chromium-bearing phase during the roasting process ensures preferential extraction of vanadium from the chromium-bearing vanadium slag. The leaching rates of vanadium and chromium reach 89.36% and 4.91% with optimized experimental conditions. The high leaching rate of vanadium and low leaching rate of chromium show good results of preferential extraction of vanadium from the chromium-bearing vanadium slag..
引用
收藏
页数:7
相关论文
共 24 条
[1]  
Fan H., 2013, J PROCESS ENG, V13, P958
[2]   Separation and recovery of chromium and vanadium from vanadium-containing chromate solution by ion exchange [J].
Fan, Yeye ;
Wang, Xuewen ;
Wang, Mingyu .
HYDROMETALLURGY, 2013, 136 :31-35
[3]   Solubility in the Quaternary Na2O-V2O5-CaO-H2O System at (40 and 80) °C [J].
Li, Lanjie ;
Du, Hao ;
Yang, Na ;
Wang, Shaona ;
Zheng, Shili ;
Zhang, Yi .
JOURNAL OF CHEMICAL AND ENGINEERING DATA, 2011, 56 (10) :3920-3924
[4]   Extraction of vanadium from high calcium vanadium slag using direct roasting and soda leaching [J].
Li, Xin-sheng ;
Xie, Bing .
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2012, 19 (07) :595-601
[5]   Oxidation process of low-grade vanadium slag in presence of Na2CO3 [J].
Li Xin-sheng ;
Xie Bing ;
Wang Guang-en ;
Li Xiao-jun .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (08) :1860-1867
[6]   A Novel Method to Extract Vanadium and Chromium from Vanadium Slag using Molten NaOH-NaNO3 Binary System [J].
Liu, Biao ;
Du, Hao ;
Wang, Shao-Na ;
Zhang, Yi ;
Zheng, Shi-Li ;
Li, Lan-Jie ;
Chen, Dong-Hui .
AICHE JOURNAL, 2013, 59 (02) :541-552
[7]   Kinetics analysis of decomposition of vanadium slag by KOH sub-molten salt method [J].
Liu, Hui-bin ;
Du, Hao ;
Wang, Da-wei ;
Wang, Shao-na ;
Zheng, Shi-li ;
Zhang, Yi .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (05) :1489-1500
[8]   Intensified decomposition of vanadium slag via aeration in concentrated NaOH solution [J].
Liu, Longjie ;
Wang, Zhonghang ;
Du, Hao ;
Zheng, Shili ;
Lassi, Ulla ;
Zhang, Yi .
INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 2017, 160 :1-7
[9]   A Novel Process for Simultaneous Extraction of Iron, Vanadium, Manganese, Chromium, and Titanium from Vanadium Slag by Molten Salt Electrolysis [J].
Liu, Shiyuan ;
Wang, Lijun ;
Chou, Kuochih .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2016, 55 (50) :12962-12969
[10]   Comparative study of alkali roasting and leaching of chromite ores and titaniferous minerals [J].
Parirenyatwa, Stephen ;
Escudero-Castejon, Lidia ;
Sanchez-Segado, Sergio ;
Hara, Yotamu ;
Jha, Animesh .
HYDROMETALLURGY, 2016, 165 :213-226