Correlation of the Volumetric Tool Wear Rate of Carbide Milling Inserts With the Material Removal Rate of Ti-6Al-4V

The objective of this paper is to assess the correlation of volumetric tool wear (VTW) and wear rate of carbide tools on the material removal rate (MRR) of titanium alloys. A previously developed methodology for assessing the worn tool material volume is utilized for quantifying the VTW of carbide tools when machining Ti-6Al-4V. To capture the tool response, controlled milling experiments are conducted at suitable corner points of the recommended feed-speed design space, for constant stock material removal volumes. For each case, the tool material volume worn away, as well as the corresponding volumetric wear profile evolution in terms of a set of geometric coefficients, is quantified-these are then related to the MRR. Further, the volumetric wear rate and the M-ratio (volume of stock removed to VTW) which is a measure of the cutting tool efficiency, are related to the MRR-these provide a tool-life based optimal MRR for profitability. This work not only elevates tool wear from a 1D to 3D concept, but helps in assessing machining economics from a stock material-removal-efficiency perspective as well.