Mitigating Corrosion Effects of Ti-48Al-2Cr-2Nb Alloy Fabricated via Electron Beam Melting (EBM) Technique by Regulating the Immersion Conditions

被引：18
作者：
Abdo, Hany S. [1 ]
Samad, Ubair Abdus [1 ]
Mohammed, Jabair Ali [1 ]
Ragab, Sameh A. [1 ]
Seikh, Asiful H. [1 ]
机构：
[1] King Saud Univ, Mech Engn Dept, POB 800, Riyadh 11421, Saudi Arabia
来源：
CRYSTALS | 2021年 / 11卷 / 08期
关键词：
electron beam melting; titanium alloys; corrosion behavior; polarization; EIS; MECHANICAL-PROPERTIES; POLARIZATION; TITANIUM;
D O I：
10.3390/cryst11080889
中图分类号：
O7 [晶体学];
学科分类号：
0702 ; 070205 ; 0703 ; 080501 ;
摘要：
The corrosion behavior of newly fabricated gamma-TiAl alloy was studied using electrochemical impedance spectroscopy (EIS) and cyclic potentiodynamic polarization (CPP) techniques. The gamma-TiAl alloy was produced from powder with compositions of Ti-48Al-2Cr-2Nb processed using electron beam melting (EBM) technique. The corrosion behavior of the bulk alloy was investigated in 1 M HCl solution for different immersion times and temperatures. The experimental results suggest that the fabricated alloy exhibits good resistance to corrosion in acid solution at room temperature. The results also indicate that with an increase in immersion time and solution temperature, the corrosion potential (Ecorr) shifts to a higher positive value, resulting in an increase in corrosion current (jcorr) and consequently a decrease in the corrosion resistance (Rp) of the alloy.
引用
收藏
页数：12
相关论文
共 23 条
  • [1] Microstructural Characterization and Corrosion-Resistance Behavior of Dual-Phase Steels Compared to Conventional Rebar
    Abdo, Hany S.
    Seikh, Asiful H.
    Mandal, Biplab Baran
    Mohammed, Jabair A.
    Ragab, Sameh A.
    Abdo, Mohamed S.
    [J]. CRYSTALS, 2020, 10 (11): : 1 - 14
  • [2] Influence of Chloride Ions on Electrochemical Corrosion Behavior of Dual-Phase Steel over Conventional Rebar in Pore Solution
    Abdo, Hany S.
    Seikh, Asiful H.
    Mohammed, Jabair A.
    Luqman, Monis
    Ragab, Sameh A.
    Almotairy, Saud M.
    [J]. APPLIED SCIENCES-BASEL, 2020, 10 (13):
  • [3] Manufacturing of Ti-6%Al and Ti-6%Al-4%V Alloys and Their Corrosion in Sodium Chloride Solutions
    Abdo, Hany S.
    Sherif, El-Sayed M.
    El-Serehy, Hamed A.
    [J]. CRYSTALS, 2020, 10 (03):
  • [4] Al Zubaidy EAH, 2011, INT J ELECTROCHEM SC, V6, P6424
  • [5] The machining of γ-TiAl intermetallic alloys
    Aspinwall, DK
    Dewes, RC
    Mantle, AL
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2005, 54 (01) : 99 - 104
  • [6] TiAl alloys in commercial aircraft engines
    Bewlay, B. P.
    Nag, S.
    Suzuki, A.
    Weimer, M. J.
    [J]. MATERIALS AT HIGH TEMPERATURES, 2016, 33 (4-5) : 549 - 559
  • [7] Formation and behaviour study of an environment-friendly corrosion inhibitor by electrochemical methods
    Bommersbach, P
    Alemany-Dumont, C
    Millet, JP
    Normand, B
    [J]. ELECTROCHIMICA ACTA, 2005, 51 (06) : 1076 - 1084
  • [8] Corrosion-Resistance Analysis of HA Layer Deposited through Electrophoresis on Ti4Al4Zr Metallic Substrate
    Cimpoesu, Ramona
    Vizureanu, Petrica
    Stirbu, Ioan
    Sodor, Alina
    Zegan, Georgeta
    Prelipceanu, Marius
    Cimpoesu, Nicanor
    Ioanid, Nicoleta
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (09):
  • [9] Evaluation of pitting corrosion by means of dynamic electrochemical impedance spectroscopy
    Darowicki, K
    Krakowiak, S
    Slepski, P
    [J]. ELECTROCHIMICA ACTA, 2004, 49 (17-18) : 2909 - 2918
  • [10] Mechanical Properties and Corrosion Resistance of TiAl6V4 Alloy Produced with SLM Technique and Used for Customized Mesh in Bone Augmentations
    De Angelis, Nicola
    Solimei, Luca
    Pasquale, Claudio
    Alvito, Lorenzo
    Lagazzo, Alberto
    Barberis, Fabrizio
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (12):
123