On the influence of drilling depth dependent modal damping on chatter vibration in BTA deep hole drilling

被引：33

作者：

Weinert, K ^{[1
]}

Webber, O ^{[1
]}

Peters, C ^{[1
]}

机构：

[1] Univ Dortmund, Dept Machining Technol, Dortmund, Germany

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2005年 / 54卷 / 01期

关键词：

machining; chatter; deep hole drilling;

D O I：

10.1016/S0007-8506(07)60123-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

BTA (Boring and Trepanning Association) deep hole drilling is applied for machining bore holes with a high length to diameter ratio. The slender tools involved make BTA processes highly susceptible to chatter vibration. Chatter-free states and states with chatter vibration corresponding to one of the first three torsional eigenfrequencies can be observed to alternate during processes with constant cutting parameters. A detailed FEA model of the significant BTA tool components involved was developed. This takes into account the drilling depth variant boundary conditions. Using this model, the state transitions can be attributed to drilling depth dependent modal damping of the involved torsional vibration modes.

引用

页码：363 / 366

页数：4

共 11 条

[1] Chatter stability of metal cutting and grinding [J].

Altintas, Y ;

Weck, M .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (02) :619-642

[2]

CHIN JH, 1996, INT J MODELLING SIMU, V14, P157

[3] Roundness, errors in BTA drilling and a model of waviness and lobing caused by resonant forced vibrations of its long drill shaft [J].

Deng, CS ;

Chin, JH .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2004, 126 (03) :524-534

[4] On the problem of spiralling in BTA deep-hole machining [J].

Gessesse, Y.B. ;

Latinovic, V.N. ;

Osman, M.O.M. .

Journal of engineering for industry, 1994, 116 (02) :161-165

[5]

Katsuki A, 1997, CIRP ANNALS 1997 MANUFACTURING TECHNOLOGY, VOLUME 46/1/1997, V46, P319

[6]

THAI TP, 1983, BEITRAG UNTERSUCHUNG

[7]

WEINERT K, 2004, ZERSPANKRAFTERMITTLU, P59

[8]

Weinert K, 2002, IND DIAMANTEN RUNDSC, V36, P26

[9]

WEINERT K, 2002, P 3 CIRP INT SEM INT, P297

[10]

Weinert K, 2004, P 4 CIRP INT SEM INT, P419

← 1 2 →