The influence of porosity and hot isostatic pressing treatment on wear characteristics of cast and P/M aluminum alloys

被引：27
作者：
Islam, Md. Aminul [1 ]
Farhat, Zoheir N. [1 ]
机构：
[1] Dalhousie Univ, Dept Proc Engn & Appl Sci, Mat Engn Program, Halifax, NS B3J 2X4, Canada
来源：
WEAR | 2011年 / 271卷 / 9-10期
关键词：
Al-Si alloy; Reciprocating wear; Porosity; Hot isostatic pressing; DRY SLIDING WEAR; BEHAVIOR; RESISTANCE; STEEL;
D O I：
10.1016/j.wear.2011.01.037
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Porosity is a common feature of cast and sintered aluminum alloys and strongly influences their properties and applications. Al-Si alloys are widely used in a variety of automotive components due to their excellent strength to weight ratio. Porosity adversely affects the mechanical properties and wear resistance of these components. In the present investigation, dry sliding wear behavior was investigated in the load range 6-20 N against AISI52100 bearing steel ball using a reciprocating ball-on-flat configuration at a frequency range of 4-20 Hz for cast and 15 Hz for sintered samples. It is found that, wear within the present load and frequency ranges is due to plastic deformation and delamination. It was also found that hot isostatic pressing treatment (HIP) decreases the total amount of porosity and average pore size, but at the expense of reduced hardness. The competition between the beneficial effect of lower porosity and the detrimental effect of lower hardness determines the final wear rate. (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码：1594 / 1601
页数：8
相关论文
共 29 条
[1]   UNLUBRICATED FRICTIONAL BEHAVIOR OF SINTERED IRON [J].
AMSALLEM, C ;
GAUCHER, A ;
GUILHOT, G .
WEAR, 1973, 23 (01) :97-112
[2]  
[Anonymous], ANN BOOK ASTM STAND
[3]  
BERGMARK A, 2002, POWDER METALL PROG, V2, P222
[4]  
Bertilsson I., 1994, P INT C MPIF TOR, V16, P19
[5]  
BOCCHINI GF, 1986, INT J POWDER METALL, V22, P185
[6]   Erosive wear of a surface coated hydroturbine steel [J].
Chauhan, Akhilesh K. ;
Goel, D. B. ;
Prakash, S. .
BULLETIN OF MATERIALS SCIENCE, 2010, 33 (04) :483-489
[7]   Is porosity always detrimental to the wear resistance of materials?-A computational study on the effect of porosity on erosive wear of TiC/Cu composites [J].
Chen, Q. ;
Li, D. Y. ;
Cook, Bruce .
WEAR, 2009, 267 (5-8) :1153-1159
[8]  
DANNINGER H, 1993, POWDER METALL INT, V25, P111
[9]   Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity [J].
Deshpande, PK ;
Lin, RY .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2) :137-145
[10]   THE ROLE OF POROSITY IN THE DRY SLIDING WEAR OF A SINTERED FERROUS ALLOY [J].
DUBRUJEAUD, B ;
VARDAVOULIAS, M ;
JEANDIN, M .
WEAR, 1994, 174 (1-2) :155-161
123