Stabilization of icosahedral phase in Si substituted version of Al65Cu20Cr15 alloy

被引:2
|
作者
Khare, V [1 ]
Tiwari, RS [1 ]
Srivastava, ON [1 ]
机构
[1] Banaras Hindu Univ, Dept Phys, Varanasi 221005, Uttar Pradesh, India
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2001年 / 304卷 / 1-2期
关键词
quasicrystalline; icosahedral phase; Al65Cu20Cr15; alloy;
D O I
10.1016/S0921-5093(00)01577-X
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In order to find out the effect of Si on quasicrystalline (QC) and related phases, Si has been substituted in place of Al in Al-Cu-Cr system. In the present investigation, various alloys corresponding to Al65-xCu20Cr15Six (x = 1, 3, 5, 7 and 10) composition have been synthesized and characterized. The investigations reveal that at 1 at.% Of Si both QC and crystalline (b.c.c., a = 8.90 Angstrom) phases are present but after annealing, the alloy becomes QC. The alloys having 3 at.% of Si has been found to show the formation of icosahedral phase which exhibits high degree of disorder. At 7 at.% Si, the dissociation of the icosahedral phase commences. The dissociated phases have been found to be icosahedral and disordered diamond cubic phase (a = 7.87 Angstrom). At the highest silicon concentration (10 at.%) another crystalline phase: primitive cubic phase (a approximate to 10.90 Angstrom) results along with the icosahedral phase. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:839 / 843
页数:5
相关论文
共 20 条
  • [1] Characterization of Rapidly Solidified Al65Cu20Fe15 Alloy in Form of Powder or Ribbon
    Litynska-Dobrzynska, L.
    Dutkiewicz, J.
    Stan-Glowinska, K.
    Dembinski, L.
    Coddet, C.
    Ochin, P.
    ACTA PHYSICA POLONICA A, 2014, 126 (02) : 512 - 515
  • [2] Effect of Fe substitution on the stabilization of the icosahedral phase in Al-Cu-V alloys
    Misra, DK
    Tiwari, RS
    Srivastava, ON
    CRYSTAL RESEARCH AND TECHNOLOGY, 2001, 36 (4-5) : 419 - 427
  • [3] On icosahedral phase formation in mechanically alloyed Al70Cu20Fe10
    Srinivas, V
    Barua, P
    Murty, BS
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 294 : 65 - 67
  • [4] Formation and stability of icosahedral phase in Al65Ga5Pd17Mn13 alloy
    Yadav, T. P.
    Shaz, M. A.
    Tiwari, R. S.
    Srivastava, O. N.
    PHILOSOPHICAL MAGAZINE, 2008, 88 (13-15) : 1995 - 2002
  • [5] Characterization of microstructures and oxidation behavior of Nb-20Si-20Cr-5Al alloy
    Alvarez, David
    Varma, S. K.
    CORROSION SCIENCE, 2011, 53 (06) : 2161 - 2167
  • [6] Formation of icosahedral phase in an Al93Fe3Cr2Ti2 bulk alloy
    Kim, K. B.
    Xu, W.
    Tomut, M.
    Stoica, M.
    Calin, M.
    Yi, S.
    Lee, W. H.
    Eckert, J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 436 (1-2) : L1 - L4
  • [7] Icosahedral quasicrystal phase in Al15Mg50Zn35 ternary alloy by rapid quenching
    Zhu Man
    Yang Gencang
    Liu Feng
    Wan Diqing
    Cheng Suling
    Zhou Yaohe
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 (07) : 1179 - 1182
  • [8] Formation of icosahedral phase in Zr65Al7.5Ni10Cu12.5Ag5 metallic glass
    Yan, Z. J.
    Dang, S. E.
    Li, Q. S.
    Hao, W. X.
    Hu, Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 452 (02) : 359 - 366
  • [9] High temperature corrosion of nanocrystalline three-phase Cu-20Ag-20Cr bulk alloy
    Cao, Z. Q.
    Li, C. W.
    Jia, Z. Q.
    Wang, Y.
    CORROSION SCIENCE, 2016, 110 : 167 - 173
  • [10] Interface Characteristics and Dynamic Compression Behaviors of Al35Ti15Cr20Mn20Cu10 High-Entroy Alloy/6061Al Composites Fabricated by Spark Plasma Sintering
    Jin, Xiaoqiang
    Zhu, Dezhi
    Liu, Shiwen
    Li, Xiaoqiang
    Yang, Chao
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (05)