Evolution of Voids in Mg/Al Diffusion Bonding Process

被引：7
|
作者：
Long, Luping [1 ]
Liu, Wensheng [1 ]
Ma, Yunzhu [1 ]
Wu, Lei [1 ]
Tang, Siwei [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 10期
基金：
国家高技术研究发展计划(863计划);
关键词：
diffusion bonding; void behaviors; plastic deformation; stresses; diffusion; MAGNESIUM; ALLOYS; MG; AL; MICROSTRUCTURE; JOINTS;
D O I：
10.1515/htmp-2016-0024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The closure process of voids was very crucial for diffusion bonding, voids behaviors in Mg/Al bonding process were investigated, and the control mechanisms of diffusion at different predominant process parameters were discussed in this paper. Finite element simulation was utilized to investigate the influence of thermal residual stresses on the appearance of secondary voids. The results showed that: the dominant mechanism of void closure was plastic deformation in the initial stage of Mg/Al diffusion bonding. Numerical results indicated that secondary voids could be easily generated in the regions where tensile residual stress gradient achieves the maximum, corresponding to area that Al3Mg2 layer at the nearby Al/Al3Mg2 interface, the segregation of voids deteriorated the performances of the bonded joints.
引用
收藏
页码：985 / 992
页数：8
相关论文
共 50 条
  • [11] Formation process of the bonding joint in Ti/Al diffusion bonding
    Yao Wei
    Wu Aiping
    Zou Guisheng
    Ren Halie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2): : 456 - 463
  • [12] An investigation on diffusion bonding of Mg/Al dissimilar metals using Zn-Bi alloy as interlayer
    Chen, Gang
    Tan, Tianbao
    Guo, Yangyang
    Wang, Hong
    Liu, Yan
    Pan, Houhong
    MATERIALS LETTERS, 2023, 349
  • [13] A study of phase constitution near the interface of Mg/Al vacuum diffusion bonding
    Liu, P
    Li, YJ
    Geng, HR
    Wang, J
    MATERIALS LETTERS, 2005, 59 (16) : 2001 - 2005
  • [14] First-principles studies of Mg17Al12, Mg2Al3, Mg2Sn, MgZn2, Mg2Ni and Al3Ni phases
    Zheng, B.
    Zhao, L.
    Hu, X. B.
    Dong, S. J.
    Li, H.
    PHYSICA B-CONDENSED MATTER, 2019, 560 : 255 - 260
  • [15] Research on the interfacial microstructure and mechanical properties of glass/Mg joint prepared by anodic bonding and vacuum diffusion bonding
    Chou, Zhao
    Hu, Lifang
    Cheng, Xiao
    Mu, Wenjin
    Jia, Weijie
    Zhao, Ruoxuan
    Hou, Zhiyong
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 120 : 449 - 459
  • [16] Optimization of process parameter of diffusion bonding of Ti -Al and Ti -Cu
    Chandrappa, K.
    Kant, Rishi
    Ali, Rashid
    Vineth, K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1689 - 1695
  • [17] Interfacial Reaction in (Mg-37.5Al)/(Mg-6.7Nd) Diffusion Couples
    Dai, Jiahong
    Shen, Shijun
    Jiang, Bin
    Zhang, Jianyue
    Yang, Qingshan
    Jiang, Zhongtao
    Dong, Hanwu
    Pan, Fusheng
    METALS AND MATERIALS INTERNATIONAL, 2016, 22 (01) : 1 - 6
  • [18] Analyzing the Effect of Diffusion Bonding Process Parameters on Bond Characteristics of Mg-Al Dissimilar Joints
    G. Mahendran
    S. Babu
    V. Balasubramanian
    Journal of Materials Engineering and Performance, 2010, 19 : 657 - 665
  • [19] Fabrication of Mg/AL multilayer plates using an accumulative extrusion bonding process
    Xin, Yunchang
    Hong, Rui
    Feng, Bo
    Yu, Huihui
    Wu, Yang
    Liu, Qing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 640 : 210 - 216
  • [20] XRD and SEM analysis near the diffusion bonding interface of Mg/Al dissimilar materials
    Li, Yajiang
    Liu, Peng
    Wang, Juan
    Ma, Haijun
    VACUUM, 2007, 82 (01) : 15 - 19
12345