Evolution of Voids in Mg/Al Diffusion Bonding Process

被引：7
|
作者：
Long, Luping [1 ]
Liu, Wensheng [1 ]
Ma, Yunzhu [1 ]
Wu, Lei [1 ]
Tang, Siwei [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 10期
基金：
国家高技术研究发展计划(863计划);
关键词：
diffusion bonding; void behaviors; plastic deformation; stresses; diffusion; MAGNESIUM; ALLOYS; MG; AL; MICROSTRUCTURE; JOINTS;
D O I：
10.1515/htmp-2016-0024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The closure process of voids was very crucial for diffusion bonding, voids behaviors in Mg/Al bonding process were investigated, and the control mechanisms of diffusion at different predominant process parameters were discussed in this paper. Finite element simulation was utilized to investigate the influence of thermal residual stresses on the appearance of secondary voids. The results showed that: the dominant mechanism of void closure was plastic deformation in the initial stage of Mg/Al diffusion bonding. Numerical results indicated that secondary voids could be easily generated in the regions where tensile residual stress gradient achieves the maximum, corresponding to area that Al3Mg2 layer at the nearby Al/Al3Mg2 interface, the segregation of voids deteriorated the performances of the bonded joints.
引用
收藏
页码：985 / 992
页数：8
相关论文
共 50 条
  • [1] Diffusion bonding of Al 7075 and Mg AZ31 alloys: Process parameters, microstructural analysis and mechanical properties
    Seyyed Afghahi, Seyyed Salman
    Jafarian, Mojtaba
    Paidar, Moslem
    Jafarian, Morteza
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (07) : 1843 - 1851
  • [2] Modelling of Voids Closure in the Diffusion Bonding Process
    Alegria, J.
    Miranda, R. M.
    de Salazar, J. M. Gomez
    Fernandes, A. A.
    ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 731 - +
  • [3] Texture evolution of the Mg/Al laminated composite fabricated by the accumulative roll bonding
    Chang, H.
    Zheng, M. Y.
    Gan, W. M.
    Wu, K.
    Maawad, E.
    Brokmeier, H. G.
    SCRIPTA MATERIALIA, 2009, 61 (07) : 717 - 720
  • [4] Diffusion mechanism and kinetics of diffusion bonded Mg/Ni/Al joint
    Zhang, Jian
    Luo, Guoqiang
    Shen, Qiang
    Zhang, Lianmeng
    ADVANCED CERAMICS AND NOVEL PROCESSING, 2014, 616 : 286 - 290
  • [5] Analyzing the Effect of Diffusion Bonding Process Parameters on Bond Characteristics of Mg-Al Dissimilar Joints
    Mahendran, G.
    Babu, S.
    Balasubramanian, V.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (05) : 657 - 665
  • [6] Microstructure evolution and mechanical properties of Mg/Al diffusion bonded joints
    Liu, Wensheng
    Long, Luping
    Ma, Yunzhu
    Wu, Lei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : 34 - 39
  • [7] Microstructure and Diffusion Behaviors of the Diffusion Bonded Mg/Al Joint
    Long, Luping
    Liu, Wensheng
    Ma, Yunzhu
    Wu, Lei
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2017, 36 (09) : 897 - 903
  • [8] MICROSTRUCTURE OF AISi17/Mg JOINTS FABRICATED BY DIFFUSION BONDING AT DIFFERENT TEMPERATURES
    Mola, Renata
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 1887 - 1892
  • [9] Texture Evolution of the Mg/Al Laminated Composite by Accumulative Roll Bonding at Ambient Temperature
    Chang Hai
    Zheng Mingyi
    Gan Weimin
    Xu Chao
    Brokmeier, H. G.
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (03) : 441 - 446
  • [10] Effect of CuNi Interlayer on Microstructure and Mechanical Property of Mg/Al Joints Welded by Diffusion Bonding
    Zhang Jian
    Luo Guoqiang
    Shen Qiang
    Zhang Lianmeng
    Huang Zhijun
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (06) : 1413 - 1417
12345