Fretting-slipping fatigue failure mode in planetary gear system

被引：17

作者：

Wei, Jing ^{[1
]}

Niu, Rui ^{[1
]}

Dong, Qingbing ^{[1
]}

Zhang, Shijie ^{[1
]}

机构：

[1] Chongqing Univ, State Key Lab Mech Transmiss, Chongqing 400044, Peoples R China

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2020年 / 136卷

基金：

中国国家自然科学基金;

关键词：

Planetary gearbox; Interference fit assembly; Fretting-slipping mode; Variable load; CRACK; DISLOCATIONS; MECHANISM; STRESS;

D O I：

10.1016/j.ijfatigue.2020.105632

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The interference fit surface between planetary gears and corresponding bearings in the planetary gearbox suffers from the most severe variable load during operation and is prone to fatigue failure. It is generally believed that the failure mode of the interference fit surface is only fretting wear. In this study, the fretting and slipping between the planetary gear inner hole and the bearing outer ring is investigated by force analysis and the finite element method. The fatigue failure mode is analyzed for the planetary gears and corresponding bearings in a planetary gearbox which standardly designed according to IEC 61400-4:2012. The surface hardness is verified according to ISO 18203:2016. Fatigue crack sources, fretting wear, and traces of slipping are found on the failed inner hole of the planetary gear and outer rings of the bearing. The failure mode of the interference fit surface between the planetary gears and the bearings is determined as simultaneous fretting and slipping under a variable load, caused by differences in the dynamic meshing forces of internal and external engagement.

引用

页数：12

共 37 条

[1] A.A.-B, 1995, GEAR MAT HEAT TREATM, pC08
[2] Fretting fatigue of a shrink-fit pin subjected to rotating bending: Experiments and simulations
Alfredsson, B.
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (10) : 1559 - 1570
[3] Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling
Bertini, L.
Santus, C.
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2015, 81 : 179 - 190
[4] Bianchi FernandoD., 2007, WIND WIND TURBINES
[5] Chen CQ, 2011, ACTA MECH SOLIDA SIN, V24, P1
[6] Interaction between dislocation and subsurface crack under condition of slip caused by half-plane contact surface normal force
Chen, Jianbin
Fang, Qihong
Liu, Youwen
[J]. ENGINEERING FRACTURE MECHANICS, 2013, 114 : 115 - 126
[7] Transient Thermomechanical Analysis of Sliding Electrical Contacts of Elastoplastic Bodies, Thermal Softening, and Melting Inception
Chen, W. Wayne
Wang, Q. Jane
Kim, Wansik
[J]. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2009, 131 (02): : 1 - 10
[8] Dong Q., 2016, RELIABILITY ANAL TRA
[9] Partial slip contact modeling of heterogeneous elasto-plastic materials
Dong, Qingbing
Zhou, Kun
Chen, W. Wayne
Fan, Qin
[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 114 : 98 - 110
[10] Multiple Inhomogeneous Inclusions and Cracks in a Half Space Under Elastohydrodynamic Lubrication Contact
Dong, Qingbing
Zhou, Kun
[J]. INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2015, 7 (01)

← 1 2 3 4 →