Experimental investigation on physical and chemical properties of solid products from co-pyrolysis of bituminous coal and semi-coke

被引:13
作者
Wang, Chang'an [1 ]
Gao, Xinyue [1 ]
Liu, Chengchang [1 ]
Zhou, Lei [1 ]
Zhao, Lin [1 ]
Du, Yongbo [1 ]
Che, Defu [1 ]
机构
[1] Xi An Jiao Tong Univ, Sch Energy & Power Engn, State Key Lab Multiphase Flow Power Engn, Xian 710049, Peoples R China
关键词
Co-pyrolysis; Semi-coke microstructure; Functional groups; Product distribution; Bituminous coal; TEMPERATURE PYROLYSIS; NITROGEN-OXIDES; CHAR; FUNCTIONALITY; COCOMBUSTION; COMBUSTION; GASIFICATION; KINETICS; BEHAVIOR; SYSTEM;
D O I
10.1016/j.joei.2021.08.004
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Semi-coke is a low-volatile solid carbonaceous fuel, which is quite difficult to combustion individually. Co-processing semi-coke with bituminous coal has the potential for efficient and clean utilization of powdery semi-coke, while the co-pyrolysis is an important step and the physical-chemical properties of residual solid products yield great influences on subsequent combustion characteristics and NOx formation. However, less work, if any, has aimed at the co-pyrolysis of bituminous coal and semi-coke, and the synergistic mechanisms on physical and chemical properties of solid products have yet to be fully understood. Even limited oxygen may generate remarkable influences on co-pyrolysis behaviors. In addition, limited oxygen is possibly present during pyrolysis process, which has been rarely paid attention to. In this work, the physicochemical properties of solid co-pyrolysis products of bituminous coal and semi-coke were investigated experiment, while the effects of multiple atmosphere composition were also emphasized, including CO2/N-2 atmosphere, N-2 atmosphere with limited O-2, and CO2/N-2 atmosphere with a little O-2. The results indicate that the dehydrogenation and poly-condensation of bituminous aromatics are observed over 700 degrees C. The semi-coke and bituminous coal have the synergistic effect in the co-pyrolysis process. In N-2 atmosphere with little oxygen, the pore development mainly occurs as the O-2 concentration is below 3%. The residual char is over-ablated with the further increasing oxygen content. When the atmosphere contains O-2, a small number of nitrogen oxides are formed. The present work can provide a scientific guidance for the utilization of semi-coke in large-scale and the design of power plant co-fired with semi-coke. This work is also beneficial to improve combustion reactivity of blended fuel, determine the optimal blending ratio and control NOx emissions.
引用
收藏
页码:59 / 72
页数:14
相关论文
共 40 条
  • [1] THE FUNCTIONALITY OF NITROGEN IN COAL AND DERIVED LIQUIDS - AN XPS STUDY
    BARTLE, KD
    PERRY, DL
    WALLACE, S
    [J]. FUEL PROCESSING TECHNOLOGY, 1987, 15 : 351 - 361
  • [2] VARIATION OF NITROGEN-CONTENT AND FUNCTIONALITY WITH RANK FOR SOME UK BITUMINOUS COALS
    BURCHILL, P
    WELCH, LS
    [J]. FUEL, 1989, 68 (01) : 100 - 104
  • [3] Cerciello F., FUEL, V287, P1
  • [4] Studying the mechanisms of ignition of coal particles by TG-DTA
    Chen, Y
    Mori, S
    Pan, WP
    [J]. THERMOCHIMICA ACTA, 1996, 275 (01) : 149 - 158
  • [5] Thermogravimetric study on the Co-combustion characteristics of oily sludge with plant biomass
    Deng, Shuanghui
    Wang, Xuebin
    Tan, Houzhang
    Mikulcic, Hrvoje
    Yang, Fuxin
    Li, Zhifeng
    Duic, Neven
    [J]. THERMOCHIMICA ACTA, 2016, 633 : 69 - 76
  • [6] Gong B, 1999, SURF INTERFACE ANAL, V28, P126, DOI 10.1002/(SICI)1096-9918(199908)28:1<126::AID-SIA633>3.0.CO
  • [7] 2-V
  • [8] The reduction of the nitrogen oxides NO and N2O to molecular nitrogen in the presence of iron, its oxides, and carbon monoxide in a hot fluidized bed
    Hayhurst, AN
    Lawrence, AD
    [J]. COMBUSTION AND FLAME, 1997, 110 (03) : 351 - 365
  • [9] Effects of oxy-fuel conditions on the products of pyrolysis in a drop tube reactor
    Heuer, S.
    Senneca, O.
    Wuetscher, A.
    Duedder, H.
    Schiemann, M.
    Muhler, M.
    Scherer, V.
    [J]. FUEL PROCESSING TECHNOLOGY, 2016, 150 : 41 - 49
  • [10] Ingraham J.R., 1963, Canadian Journal of Chemical Engineering, V41, P170, DOI 10.1002/cjce.5450410408