Effect of thermomechanical processing on the microstructure and properties of a low carbon copper bearing steel

被引：20

作者：

Banerjee, MK ^{[1
]}

Banerjee, PS ^{[1
]}

Datta, S ^{[1
]}

机构：

[1] BE Coll DU, Dept Met, Howrah 711103, India

来源：

ISIJ INTERNATIONAL | 2001年 / 41卷 / 03期

关键词：

HSLA steel; copper; boron; thermomechanical processing; microstructure; mechanical properties;

D O I：

10.2355/isijinternational.41.257

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A boron treated copper bearing HSLA steel containing austenite formers like manganese and nickel, somewhat lower in amount than that in HSLA 100 variety of steel is chosen for the study. The role of thermomechanical processing on the microstructure and mechanical properties of the above steel has been investigated. Differential scanning calorimetric study is carried out for understanding the precipitation behaviour of copper in HSLA steel under the influence of boron. The microstructure of the experimental steel is found to consist of laths of martensites and bainite. MA constituents of ribbon like morphology are observed at the lath boundaries. Higher strength properties of the steel are attributed to the presence of finely distributed precipitates of copper and microalloy carbides.

引用

页码：257 / 261

页数：5

共 13 条

[1]

BANERJEE MK, 2000, SCAND J METALL, V29

[2]

Czyryca E.J., 1993, Key Engineering Materials, V84, P491, DOI 10.4028/www.scientific.net/kem.84-85.491

[3] MULTIPHASE MICROSTRUCTURES AND THEIR PROPERTIES IN HIGH-STRENGTH LOW-CARBON STEELS [J].

DEARDO, AJ .

ISIJ INTERNATIONAL, 1995, 35 (08) :946-954

[4]

Foley R. P., 1991, P INT C PROC MICR PR, P315

[5] CONTROL OF GRAIN-SIZE AND SUB-STRUCTURE IN PLAIN CARBON AND HIGH-STRENGTH LOW-ALLOY (HSLA) STEELS - PROBLEM AND THE PROSPECT [J].

GALIBOIS, A ;

KRISHNADEV, MR ;

DUBE, A .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1979, 10 (08) :985-995

[6]

HICHO GE, 1990, J HEAT TREATING, V8, P101

[7] EFFECTS OF SMALL AMOUNTS OF B, NB AND TI ADDITIONS ON NUCLEATION AND GROWTH-PROCESSES OF INTERMEDIATE TRANSFORMATION PRODUCTS IN LOW-CARBON 3-PERCENT MN STEELS [J].

JUNG, YC ;

UENO, H ;

OHTSUBO, H ;

NAKAI, K ;

OHMORI, Y .

ISIJ INTERNATIONAL, 1995, 35 (08) :1001-1005

[8] FERRITIC MICROSTRUCTURES IN CONTINUOUSLY COOLED LOW-CARBON AND ULTRALOW-CARBON STEELS [J].

KRAUSS, G ;

THOMPSON, SW .

ISIJ INTERNATIONAL, 1995, 35 (08) :937-945

[9] Precipitation and phase transformation of copper particles in low alloy ferritic and martensitic steels [J].

Maruyama, N ;

Sugiyama, M ;

Hara, T ;

Tamehiro, H .

MATERIALS TRANSACTIONS JIM, 1999, 40 (04) :268-277

[10] TRANSFORMATION BEHAVIOR AND MICROSTRUCTURES IN ULTRA-LOW CARBON-STEELS [J].

SHIBATA, K ;

ASAKURA, K .

ISIJ INTERNATIONAL, 1995, 35 (08) :982-991

← 1 2 →