Effect of ceramic nanopowders on rheology of thermoplastic suspensions

被引:16
|
作者
Trunec, M [1 ]
Hrazdera, H [1 ]
机构
[1] Brno Univ Technol, Dept Ceram, Brno 61669, Czech Republic
关键词
mixing; ZrO2; thermoplastic suspension; rheology;
D O I
10.1016/j.ceramint.2004.10.001
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Rheological behaviour of thermoplastic polymer melts containing 20-50 vol.% of ceramic nanopowders was studied. For the preparation of thermoplastic polymer suspensions three ZrO2 powders with specific surface areas from 6.5 to 123 m(2) g(-1) were used. Using a capillary rheometer, viscous behaviour was examined in the temperature range from 100 to 150 degrees C and in the shear rate range from 100 to 1000 s(-1). The viscosity of suspensions increased with increasing specific surface area of ceramic powder. The suspensions were of pseudoplastic nature, which was described by the power law. The power law exponent and the activation energy of viscous flow of suspensions decreased almost linearly with increasing specific surface area of the powder. The maximum volume fraction of the powder in the suspension also decreased with increasing specific surface area of the powder. The causes of the changes in viscous behaviour of the suspensions in dependence on the specific surface area of powders were discussed. (c) 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码:845 / 849
页数:5
相关论文
共 50 条
  • [1] The effect of ionic surfactant adsorption on the rheology of ceramic glaze suspensions
    Panya, P
    Wanless, EJ
    Arquero, OA
    Franks, GV
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (03) : 540 - 546
  • [2] Rheology of particulate suspensions in ceramic industry
    Rasteiro, MG
    Salgueiros, I
    PARTICULATE SCIENCE AND TECHNOLOGY, 2005, 23 (02) : 145 - 157
  • [3] RHEOLOGY OF STERICALLY STABILIZED CERAMIC SUSPENSIONS
    RAJAIAH, J
    RUCKENSTEIN, E
    ANDREWS, GF
    FORSTER, EO
    GUPTA, RK
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1994, 33 (10) : 2336 - 2340
  • [4] INTERFACIAL FORCES AND RHEOLOGY OF CERAMIC SUSPENSIONS
    JANNEY, MA
    ONODA, GY
    AMERICAN CERAMIC SOCIETY BULLETIN, 1980, 59 (03): : 347 - 347
  • [5] Effect of the water quality of the benefit process in the rheology of the ceramic kaolin suspensions
    Molina-Macias, Anngie K.
    Penuela, Gustavo A.
    INGENIERIA Y COMPETITIVIDAD, 2019, 21 (01): : 117 - 126
  • [6] Rheology of ceramic suspensions in aqueous polysaccharide matrices
    Lapasin, R
    Zupancic, A
    APPLIED MECHANICS AND ENGINEERING, VOL 4, SPECIAL ISSUE: "ICER '99", 1999: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ENGINEERING RHEOLOGY ICER '99, 1999, : 357 - 362
  • [7] Effect of monomers with different functionalities on stability, rheology, and curing behavior of ceramic suspensions
    Lin, Lifu
    Wu, Haidong
    Huang, Zhaoquan
    Wu, Shanghua
    Materials Chemistry and Physics, 2022, 275
  • [8] Effect of monomers with different functionalities on stability, rheology, and curing behavior of ceramic suspensions
    Lin, Lifu
    Wu, Haidong
    Huang, Zhaoquan
    Wu, Shanghua
    MATERIALS CHEMISTRY AND PHYSICS, 2022, 275
  • [9] RHEOLOGY OF COMPOSITE CERAMIC INJECTION-MOLDING SUSPENSIONS
    STEDMAN, SJ
    EVANS, JRG
    WOODTHORPE, J
    JOURNAL OF MATERIALS SCIENCE, 1990, 25 (03) : 1833 - 1841
  • [10] Formulation and Rheology of Tape Casting Suspensions Based on BaTiO3 Nanopowders
    Ivanchenko, S. E.
    Dulina, I. O.
    Umerova, S. O.
    Nikulin, A. G.
    Ragulya, A. V.
    NANOPLASMONICS, NANO-OPTICS, NANOCOMPOSITES, AND SURFACE STUDIES, 2015, 167 : 193 - 202