Synthesis, characterization and physical properties of rigid polyurethane foams prepared with poly(propylene oxide) polyols containing graphene oxide

被引：28

作者：

Santiago-Calvo, Mercedes ^{[1
]}

Blasco, Victoria ^{[2
]}

Ruiz, Carolina ^{[2
]}

Paris, Rodrigo ^{[2
]}

Villafane, Fernando ^{[3
]}

Angel Rodriguez-Perez, Miguel ^{[1
]}

机构：

[1] Univ Valladolid, Fac Sci, Condensed Matter Phys Dept, Cellular Mat Lab CellMat, Campus Miguel Debbes,Paseo Belen 7, E-47011 Valladolid, Spain

[2] Repsol SA, Chem Technol Div, C Agustin Betancourt S-N, Mostoles 28935, Spain

[3] Univ Valladolid, Fac Sci, GIR MIOMeT IU Cinquim Quim Inorgan, Campus Miguel Delibes,Paseo Belen 7, E-47011 Valladolid, Spain

来源：

EUROPEAN POLYMER JOURNAL | 2017年 / 97卷

关键词：

Polyurethane foam; Graphene oxide; Thermal conductivity; Reaction kinetics; MECHANICAL-PROPERTIES; THERMAL-CONDUCTIVITY; CHEMISTRY;

D O I：

10.1016/j.eurpolymj.2017.10.013

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Water blown rigid polyurethane (RPU) foams are produced by using in situ polymerized polyols functionalized with graphene oxide (GO). The effect of the polyol functionalized with GO on the foaming kinetics, cellular structure, thermal conductivity, and compressive mechanical properties of the RPU foams is investigated. The inclusion of small amounts of GO in the system (0.017, 0.033 and 0.088 wt%) allows reducing the cell size up to 33%. The thermal conductivity is also reduced in nanocomposites foams. The inclusion of the GO particles deteriorates the mechanical performance of the materials. On the other hand, the effect of GO on the polymerization reaction kinetics are evaluated by infrared expandometry, FTIR spectroscopy and reaction temperature measurements. These kinetic studies show that the presence of the particles induces high percentages of urea groups during foaming, and hence the resulting foams show higher expansion. Isocyanate conversion and the temperature reached for the foam containing GO slightly decrease with respect to those of the pure foam.

引用

页码：230 / 240

页数：11

共 41 条

[1] Applicability of the transient plane source method to measure the thermal conductivity of low-density polyethylene foams [J].