Lap shear tests on repaired wrought-iron riveted connections

被引：9

作者：

Collette, Quentin ^{[1
]}

Sire, Stephane ^{[2
]}

Wouters, Ine ^{[1
]}

机构：

[1] Vrije Univ Brussel, Fac Engn, Dept Architectural Engn ARCH, B-1050 Brussels, Belgium

[2] Univ Brest, LBMS, EA 4325, F-29238 Brest 3, France

来源：

ENGINEERING STRUCTURES | 2015年 / 85卷

基金：

比利时弗兰德研究基金会;

关键词：

Riveted connections; Lap joint; Hot-driven rivets; Wrought iron; Repair; Steel; Fabrication; Riveting; Shear test;

D O I：

10.1016/j.engstruct.2014.12.012

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Engineers assessing and strengthening the structural safety of 19th-century wrought-iron riveted connections need information on the materials applied, the riveting technology and the impact of remedial works. However, the structural impact of actual remedial works on wrought-iron riveted connections remains little known to this day. Therefore, a lap shear test campaign on single riveted single lap joints made of wrought iron was carried out. Both original and repaired riveted lap joints were designed, fabricated and tested. This paper reports on the ultimate shear behaviour of wrought-iron riveted connections and covers the effect of the quality of riveting. The shear tests showed that original riveted specimens failed in tension (plate net section failure). The repair intervention involving modern steel materials and techniques improved the ultimate shear behaviour significantly. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：170 / 181

页数：12

共 14 条

[11] Inelastic Buckling Analysis of Steel X-Bracing with Bolted Single Shear Lap Connections
Davaran, Ali
Gelinas, Alexandre
Tremblay, Robert
JOURNAL OF STRUCTURAL ENGINEERING, 2015, 141 (08)
[12] Experimental lap-shear tests on friction dampers with single and double slotted holes
Nastri, Elide
Latour, Massimo
Pecorari, Osvaldo
Piluso, Vincenzo
ENGINEERING STRUCTURES, 2024, 308
[13] Riveted connections in historical iron and steel structures: one turbulent century of technological, structural and geometrical considerations (1840-1940)
Collette, Q.
Wouters, I.
Lauriks, L.
Verswijver, K.
MATERIAUX & TECHNIQUES, 2012, 100 (02): : 137 - 154
[14] Tests on glulam-CLT shear connections with double-sided punched metal plate fasteners and inclined screws
Jacquier, Nicolas
Girhammar, Ulf Arne
CONSTRUCTION AND BUILDING MATERIALS, 2014, 72 : 444 - 457

← 1 2 →