Lap shear tests on repaired wrought-iron riveted connections

被引：9

作者：

Collette, Quentin ^{[1
]}

Sire, Stephane ^{[2
]}

Wouters, Ine ^{[1
]}

机构：

[1] Vrije Univ Brussel, Fac Engn, Dept Architectural Engn ARCH, B-1050 Brussels, Belgium

[2] Univ Brest, LBMS, EA 4325, F-29238 Brest 3, France

来源：

ENGINEERING STRUCTURES | 2015年 / 85卷

基金：

比利时弗兰德研究基金会;

关键词：

Riveted connections; Lap joint; Hot-driven rivets; Wrought iron; Repair; Steel; Fabrication; Riveting; Shear test;

D O I：

10.1016/j.engstruct.2014.12.012

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Engineers assessing and strengthening the structural safety of 19th-century wrought-iron riveted connections need information on the materials applied, the riveting technology and the impact of remedial works. However, the structural impact of actual remedial works on wrought-iron riveted connections remains little known to this day. Therefore, a lap shear test campaign on single riveted single lap joints made of wrought iron was carried out. Both original and repaired riveted lap joints were designed, fabricated and tested. This paper reports on the ultimate shear behaviour of wrought-iron riveted connections and covers the effect of the quality of riveting. The shear tests showed that original riveted specimens failed in tension (plate net section failure). The repair intervention involving modern steel materials and techniques improved the ultimate shear behaviour significantly. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：170 / 181

页数：12

共 14 条

[1] Influence of camming imperfections on the resistance of lap shear riveted connections
Milone, Aldo
D'Aniello, Mario
Landolfo, Raffaele
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2023, 203
[2] Characterization of a 12-pdr wrought-iron cannonball from the Akko 1 shipwreck
Cvikel, D.
Ashkenazi, D.
Stern, A.
Kahanov, Y.
MATERIALS CHARACTERIZATION, 2013, 83 : 198 - 211
[3] Experimental investigations on hot-driven structural rivets in historical French and Belgian wrought-iron structures (1880s-1890s)
Collette, Quentin
Sire, Stephane
Vermes, William J.
Mesler, Vernon J.
Wouters, Ine
CONSTRUCTION AND BUILDING MATERIALS, 2014, 54 : 258 - 269
[4] Experimental investigation on shear behaviour of riveted connections in steel structures
D'Aniello, M.
Portioli, F.
Fiorino, L.
Landolfo, R.
ENGINEERING STRUCTURES, 2011, 33 (02) : 516 - 531
[5] Modified pendulum hammer in impact tests of adhesive, riveted and hybrid lap joints
Komorek, Andrzej
Godzimirski, Jan
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2021, 104
[6] Damage Propagation Analysis in the Single Lap Shear and Single Lap Shear-Riveted CFRP Joints by Acoustic Emission and Pattern Recognition Approach
Barile, Claudia
Casavola, Caterina
Pappalettera, Giovanni
Vimalathithan, Paramsamy Kannan
MATERIALS, 2020, 13 (18)
[7] MORPHOGENESIS OF THE THEORY AND DESIGN PRINCIPLES OF RIVETED CONNECTIONS IN HISTORICAL IRON AND STEEL STRUCTURES
Collette, Quentin
Wouters, Ine
Lauriks, Leen
Verswijver, Koen
STRUCTURAL ANALYSIS OF HISTORICAL CONSTRUCTIONS, VOLS 1-3, 2012, : 1080 - 1088
[8] Fatigue life prediction of hot-riveted shear connections using system reliability
Leonetti, Davide
Maljaars, Johan
Snijder, H. H.
ENGINEERING STRUCTURES, 2019, 186 : 471 - 483
[9] Strength prediction of self-pierce riveted joint in cross-tension and lap-shear
Haque, Rezwanul
Durandet, Yvonne
MATERIALS & DESIGN, 2016, 108 : 666 - 678
[10] Classification of Failure Modes in Friction Stir Blind Riveted Lap-Shear Joints With Dissimilar Materials
Wang, Wei-Ming
Khan, Haris Ali
Li, Jingjing
Miller, Scott F.
Trimble, A. Zachary
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (02):

← 1 2 →