The influence of inlet flow distortion on the performance of a centrifugal compressor and the development of an improved inlet using numerical simulations

The performance of centrifugal compressors can be seriously affected by inlet flow distortions due to the unsatisfactory nature of the inlet configuration and the resulting inlet flow structure. Experimental tests have been carried out for the comparison of centrifugal compressor stage efficiency with two different inlet configurations, one of which is straight with constant cross-sectional area and the other a 90 degrees curved pipe with nozzle shape. The comparative test results indicated significant compressor stage performance difference between the two different inlet configurations and the details are discussed to understand the performance behaviour of the compressor exposed to the distorted flow from the bend inlet configuration. The experimental investigation motivated the need for a new inlet design as well as a clear picture of the detailed flow field in the existing inlet design using numerical simulations. Two design approaches are reported in this paper, one of which is the location of vanes and the other the length of the curvature radius. For a more effective design method, a generalized formula is developed for the optimum position and number of vanes in such a way that each divided flow passage with vanes shares the same pressure gradient in radial direction. Numerical simulation results are presented and discussed in terms of mass-averaged parameters and flow structures, based on the comparison of flow properties at the pipe exit cross-sectional area of each design. Finally, new designs of different inlet systems are proposed to reduce the secondary flow and to provide flow as uniform as possible for a compressor.