Uptake of iron, oxygen and nitrogen in molybdenum during ball milling

被引：32

作者：

Lucks, I ^{[1
]}

Lamparter, P ^{[1
]}

Mittemeijer, EJ ^{[1
]}

机构：

[1] Max Planck Inst Met Res, D-70174 Stuttgart, Germany

来源：

ACTA MATERIALIA | 2001年 / 49卷 / 13期

关键词：

ball milling; X-Ray diffraction (XRD);

D O I：

10.1016/S1359-6454(01)00154-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Molybdenum powder was ball milled in a steel vessel with hardened steel balls under Ar, O-2 and N-2 atmosphere, respectively. The milling products were examined by chemical analysis, X-ray diffraction and neutron diffraction. During milling under Ar or O-2 the iron as well as the oxygen content of the samples increases dependent on the number of interruptions of the milling process. The presence of dissolved oxygen seems to facilitate the solubility of iron in the molybdenum powder. Milling in a nitrogen gas atmosphere results in the formation of a nanocrystalline cubic gamma -Mo2N phase and a Mo-rich amorphous-like grain boundary phase. The microstructural imperfection was characterised by X-ray diffraction-line profile analysis. A method was proposed for the evaluation of the crystallite size and the microstrain in nanocrystalline materials, as well as the amount and structure of disordered grain boundaries from the reduced pair correlation function. (C) 2001 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

引用

页码：2419 / 2428

页数：10

共 24 条

[1]

[Anonymous], 1968, LA4003 LOS AL SCI LA

[2]

Balzar D, 1996, J APPL CRYSTALLOGR, V29, P16, DOI 10.1107/S0021889895008478

[3]

BOR TC, UNPUB

[4]

CALKA A, 1995, MATER SCI FORUM, V179-, P295, DOI 10.4028/www.scientific.net/MSF.179-181.295

[5] Nitrogenation during ball milling of stainless steel [J].

Calka, A ;

Wexler, D ;

Zhou, J ;

Dunne, D .

MECHANICALLY ALLOYED, METASTABLE AND NANOCRYSTALLINE MATERIALS, PART 1, 1998, 269-2 :265-270

[6] DETERMINATION OF CRYSTALLITE SIZE AND LATTICE-DISTORTIONS THROUGH X-RAY-DIFFRACTION LINE-PROFILE ANALYSIS - RECIPES, METHODS AND COMMENTS [J].

DELHEZ, R ;

DEKEIJSER, TH ;

MITTEMEIJER, EJ .

FRESENIUS ZEITSCHRIFT FUR ANALYTISCHE CHEMIE, 1982, 312 (01) :1-16

[7]

*JCPDS ICDD, 1990, 060696 JCPDS ICDD

[8]

*JCPDS ICDD, 1999, 251366 JCPDS ICDD

[9] Synthesis of nanostructured materials by mechanical milling: Problems and opportunities [J].

Koch, CC .

NANOSTRUCTURED MATERIALS, 1997, 9 (1-8) :13-22

[10]

Lamparter P, 1993, MATERIAL SCI TECHNOL, V1, P217

← 1 2 3 →