Degradation mechanisms of magnesia-carbon refractories by high-alumina stainless steel slags under vacuum

被引：30

作者：

Guo, M. ^{[1
]}

Parada, S. ^{[1
]}

Jones, P. T. ^{[1
]}

Van Dyck, J. ^{[1
]}

Boydens, E. ^{[1
]}

Durinck, D. ^{[1
]}

Blanpain, B. ^{[1
]}

Wollants, P. ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Louvain, Belgium

来源：

CERAMICS INTERNATIONAL | 2007年 / 33卷 / 06期

关键词：

wear resistance; corrosion; MgO; refractories;

D O I：

10.1016/j.ceramint.2006.03.009

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The corrosion behaviour of a pitch-bonded magnesia-carbon refractory by an Al(2)O(3) rich (similar to 15 wt.%) stainless steelmaking slag was investigated by rotating finger tests in a vacuum induction furnace at high temperature (> 1650 degrees C and low oxygen partial pressure (1.5-4.3 x 10(-10) atm). This study confirms the poor slagline behaviour of MgO-C bricks industrially observed in VOD ladies. Higher temperatures and longer exposure times lead to more severe slag infiltration and direct MgO dissolution. The intrinsic MgO-C reaction is the major decarburisation mechanism, while extrinsic decarburisation by oxygen from the atmosphere and/or reducible slag components (CrO(x), FeO(x)) was limited. Three kinds of metallic particles with different size, shape, location, composition and origin were observed in the refractory specimens. Concurrently, the thermodynamic conditions for the formation of a protective Mg(Al,Cr)(2)O(4) spinel layer at the slag/refractory interface are investigated. The industrial relevance of this spinel layer formation is discussed with respect to the chosen Al(2)O(3) level. Guidelines are proposed to minimise MgO refractory dissolution in VOD slaglines. (C) 2006 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：1007 / 1018

页数：12

共 26 条

[1]

BAKER BH, 1975, AM CERAM SOC BULL, V54, P665

[2]

BARTHEL H, 1966, STAHL EISEN, V86, P81

[3]

Engh T. A., 1992, Principles of Metal Refining

[4]

GUO M, 2004, P 43 ANN C MET CIM H, P687

[5]

GUO M, UNPUB STEEL RES INT

[6]

Guo M., 2004, P 7 INT C MOLT SLAGS, P327

[7]

HERRON RH, 1967, AM CERAM SOC BULL, V46, P1163

[8]

Jansson S., 2004, P 7 INT C MOLTEN SLA, P341

[9]

Jones PT, 2000, ATOM SPECTROSC, V21, P86

[10]

Jones PT, 1999, IRON STEELMAKER, V26, P31

← 1 2 3 →