Manufacture and application of ultra-small micro end mills

被引：100

作者：

Aurich, Jan C. ^{[1
]}

Reichenbach, Ingo G. ^{[1
]}

Schueler, Guido M. ^{[1
]}

机构：

[1] Univ Kaiserslautern, Inst Mfg Technol & Prod Syst, D-67663 Kaiserslautern, Germany

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2012年 / 61卷 / 01期

关键词：

Milling; Micromachining; Cutting tool;

D O I：

10.1016/j.cirp.2012.03.012

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The use of micro parts and micro structured elements has constantly grown over the past decade. Milling with micro end-mills belongs to the manufacturing technologies which offer a high potential for competitive micro machining. However, the design criteria for the micro end-mills and their manufacture pose many challenges. In this paper, first the design and manufacture of single-edge micro end-mills with diameters between 10 and 50 mu m and a variable helix angle is described. Second, the use of these end-mills in titanium and polymethyl methacrylate (PMMA) is described to demonstrate their potential. (C) 2012 CIRP.

引用

页码：83 / 86

页数：4

共 12 条

[1]

Aurich JC, 2008, P 3 INT C HIGH PERF, P189

[2] A study on the micro tooling for micro/nano milling [J].

Cheng, Xiang ;

Wang, Zhigang ;

Nakamoto, Kazuo ;

Yamazaki, Kazuo .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 53 (5-8) :523-533

[3] Recent advances in mechanical micromachining [J].

Dornfeld, D. ;

Min, S. ;

Takeuchi, Y. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (02) :745-768

[4]

Egashira K., 2003, Journal of the Japan Society of Precision Engineering, V69, P1449, DOI 10.2493/jjspe.69.1449

[5] Micromilling of microbarbs for medical implants [J].

Filiz, Sinan ;

Xie, Luke ;

Weiss, Lee E. ;

Ozdoganlar, O. B. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (3-4) :459-472

[6]

Goto T., 2010, J JAPAN SOC ABRASIVE, V54, P105

[7]

Masuzawa T, 2000, CIRP ANNALS 2000: MANUFACTURING TECHNOLOGY, VOL 49/2/2000, P473

[8] A study on initial contact detection for precision micro-mold and surface generation of vertical side walls in micromachining [J].

Min, S. ;

Sangermann, H. ;

Mertens, C. ;

Dornfeld, D. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (01) :109-112

[9] Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools [J].

Oezel, T. ;

Thepsonthi, T. ;

Ulutan, D. ;

Kaftanoglu, B. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (01) :85-88

[10] Microstructure grooves with a width of less than 50 μm cut with ground hard metal micro end mills [J].

Schaller, T ;

Bohn, L ;

Mayer, J ;

Schubert, K .

PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1999, 23 (04) :229-235

← 1 2 →