Cold plastic formability of aluminium-based MMCs

被引：0

作者：

Dodd, B ^{[1
]}

LePetitcorps, Y ^{[1
]}

机构：

[1] INST CHIM MAT CONDENSEE BORDEAUX, F-33600 PESSAC, FRANCE

来源：

CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2 | 1997年 / 127-3卷

关键词：

metal matrix composites; squeeze casting; stir casting; hydrostatic pressure; cold forming; forging; backward extrusion; gears;

D O I：

10.4028/www.scientific.net/KEM.127-131.517

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Substantial improvement in the cold formabilities of two Al-based MMCs manufactured by a P/M technique and stir casting have been found by suitable heat treatments, The two materials used were Al-2124/SiCp (17 vol.%, similar to 3 and similar to 13 mu m in diameter) and A356/SiCp (15 vol.%, similar to 16 mu m in diameter), When both materials were subjected to over-ageing treatments, they exhibited large plastic strains before fracture in compressive processes. A conventional closed-die forging was carried out on the Al-2124 MMCs as well as a backward can extrusion, Also bevel gears were manufactured from the A356 MMC, In each case the particles shattered and the matrix also contained cracks. These cracks were healed by peak ageing. This also improves the fatigue lives of the components.

引用

页码：517 / 523

页数：7

共 50 条

[41] Mechanical and Tribological Analysis of the Fabricated Al 6063-based MMCs with SiC Reinforcement Particles [J].

Pallab Sarmah ;

Promod Kumar Patowari .

Silicon, 2023, 15 :2781-2796

[42] Review of recent trends and developments in aluminium 7075 alloy and its metal matrix composites (MMCs) for aircraft applications [J].

Khalid, Muhammad Yasir ;

Umer, Rehan ;

Khan, Kamran Ahmed .

RESULTS IN ENGINEERING, 2023, 20

[43] Microstructural, Mechanical and Tribological Behaviour of NiTi/SiC/ZrO2 Reinforced Aluminium 6061 Hybrid MMCs [J].

Maurya, Saurabh Kumar ;

Susheel, Chander Kant ;

Manna, Alakesh .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (09) :2739-2750

[44] Effect of Al2O3 reinforcement and precipitates on corrosion behaviour of 2618 and 6061 aluminium MMCs [J].

Bragaglia, Mario ;

Montanari, Roberto ;

Montesperelli, Giampiero .

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2019, 54 (07) :601-613

[45] Dry sliding wear behavior of Al2O3 fiber and SiC particle reinforced aluminium based MMCs fabricated by squeeze casting method [J].

Wang, Yi-qi ;

Song, Jung-il .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (07) :1441-1448

[46] Laboratory test simulation of galling in cold forming of aluminium [J].

Heinrichs, J. ;

Jacobson, S. .

WEAR, 2009, 267 (12) :2278-2286

[47] Deformation behaviour of aluminium low-micron MMCs and MMNCs at warm working temperatures (0.3-0.5 Tm) [J].

Gxowa, Z. ;

Chown, L. H. ;

Govender, G. ;

Curle, U. .

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY, 2016, 116 (10) :963-968

[48] A new method for cold forming of aluminium composites to high strains using superimposed hydrostatic pressure [J].

Nastran, M ;

Kuzman, K ;

Dodd, B .

STROJARSTVO, 2001, 43 (4-6) :143-149

[49] Analysis of mechanical properties of cold extruded Al 6061 TiB2 MMCs and validated for finite element analysis [J].

Gobalakrishnan, B. ;

Rajaravi, C. ;

Udhayakumar, Gobikrishnan ;

Lakshminarayanan, P. R. ;

Prabhu, M. Sivanesh .

MATERIALS TODAY-PROCEEDINGS, 2021, 43 :1283-1292

[50] Evaluation of critical wear transition loads of MMCs by rule based fuzzy modelling [J].

Zhang, Zhenfang ;

Zhang, Liangchi ;

Mai, Yiu-Wing .

TRIBOLOGY LETTERS, 1996, 2 (01) :89-97

← 1 2 3 4 5 →