Cold plastic formability of aluminium-based MMCs

被引：0

作者：

Dodd, B ^{[1
]}

LePetitcorps, Y ^{[1
]}

机构：

[1] INST CHIM MAT CONDENSEE BORDEAUX, F-33600 PESSAC, FRANCE

来源：

CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2 | 1997年 / 127-3卷

关键词：

metal matrix composites; squeeze casting; stir casting; hydrostatic pressure; cold forming; forging; backward extrusion; gears;

D O I：

10.4028/www.scientific.net/KEM.127-131.517

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Substantial improvement in the cold formabilities of two Al-based MMCs manufactured by a P/M technique and stir casting have been found by suitable heat treatments, The two materials used were Al-2124/SiCp (17 vol.%, similar to 3 and similar to 13 mu m in diameter) and A356/SiCp (15 vol.%, similar to 16 mu m in diameter), When both materials were subjected to over-ageing treatments, they exhibited large plastic strains before fracture in compressive processes. A conventional closed-die forging was carried out on the Al-2124 MMCs as well as a backward can extrusion, Also bevel gears were manufactured from the A356 MMC, In each case the particles shattered and the matrix also contained cracks. These cracks were healed by peak ageing. This also improves the fatigue lives of the components.

引用

页码：517 / 523

页数：7

共 50 条

[31] Predictive Analysis of Slurry Erosion Behaviour in Aluminium-Based Hybrid Metal Matrix Composites: Experimental and Machine Learning Approach [J].

Sharath B.N. ;

Karthik S. ;

Madhu P. ;

Madhu K.S. ;

Pradeep D.G. .

Journal of Bio- and Tribo-Corrosion, 2023, 9 (04)

[32] Finite element analysis of deformation mechanism of SiC reinforced 6061 aluminium-based metal matrix composites under compression [J].

Ambrosio, Gianni D. ;

Pramanik, A. ;

Basak, A. K. ;

Prakash, Chander ;

Shankar, S. .

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (08) :6237-6254

[33] Pitting corrosion in cast 7XXX aluminium alloys and fibre reinforced MMCs [J].

Winkler, SL ;

Ryan, MP ;

Flower, HM .

CORROSION SCIENCE, 2004, 46 (04) :893-902

[34] Enhanced mechanical and wear properties of aluminium-based composites reinforced with a unique blend of granite particles and boron carbide for sustainable material recycling [J].

Sekhar, R. Anand ;

Pillai, R. Rakesh ;

Ali, M. Mubarak ;

Kumar, C. N. Shyam .

JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 963

[35] Comparison between the experimental and theoretical tensile behaviour of aluminium-based metal matrix composites reinforced with preforms of alpha-alumina platelets [J].

Massardier, V ;

Fougeres, R ;

Merle, P .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 203 (1-2) :93-104

[36] Effects of TC4 foil on the microstructures and mechanical properties of accumulatively roll-bonded aluminium-based metal matrix composites [J].

Liu, C. Y. ;

Zhang, B. ;

Tang, X. ;

Luo, K. ;

Ma, M. Z. ;

Liu, R. P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 615 :367-372

[37] Cold forming of aluminium - State of the art [J].

Bay, N .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 71 (01) :76-90

[38] Effect of Al2O3 nanoparticles on the mechanical behaviour of aluminium-based metal matrix composite synthesized via powder metallurgy [J].

Zaiemyekeh, Zahra ;

Liaghat, Gholamhossein ;

Khan, Muhammad K. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2021, 235 (10) :2340-2355

[39] Cold repeated forming of compact for aluminium foam [J].

Mori, Ken-ichiro ;

Nishikawa, Hikaru .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (12) :1580-1586

[40] Mechanical and Tribological Analysis of the Fabricated Al 6063-based MMCs with SiC Reinforcement Particles [J].

Sarmah, Pallab ;

Patowari, Promod Kumar .

SILICON, 2023, 15 (06) :2781-2796

← 1 2 3 4 5 →