Friction surfacing: A tool for surface crack repair

被引：30

作者：

Damodaram, R. ^{[1
]}

Rai, Pranav ^{[2
]}

Daniel, S. Cyril Joseph ^{[1
]}

Bauri, Ranjit ^{[3
]}

Yadav, Devinder ^{[2
]}

机构：

[1] Sri Sivasubramaniya Nadar Coll Engn, Dept Mech Engn, Chennai 603110, Tamil Nadu, India

[2] Indian Inst Technol Patna, Dept Met & Mat Engn, Patna 801106, Bihar, India

[3] Indian Inst Technol Madras, Dept Met & Mat Engn, Chennai 600036, Tamil Nadu, India

来源：

SURFACE & COATINGS TECHNOLOGY | 2021年 / 422卷

关键词：

Friction surfacing; Crack repair; Coating; Microstructure; Inconel; 718; BEHAVIOR; MICROSTRUCTURES; TEMPERATURE; HYBRID;

D O I：

10.1016/j.surfcoat.2021.127482

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The present work demonstrates the feasibility of friction surfacing as a tool to repair surface cracks. An artificial crack, made on Inconel 718 plate was repaired by depositing a self-mating coating by friction surfacing. The crack was completely filled and the coating exhibited sound bonding with the substrate. For complete filling of the crack, the optimized process parameters depends on the crack dimensions. The coating microstructure was characterized by equiaxed fine grains with an average grain size of 1-3 mu m and with a high fraction (>78%) of high angle grain boundaries. The microstructure in the coating evolves through dynamic recrystallization process, driven by combination of high strain rate and high temperature during friction surfacing. The method opens up a new way of repairing surface cracks and enhancing the service life of engineering components.

引用

页数：8

共 33 条

[1] Repair welding of wrought superalloys: Alloy 718, Allvac 718Plus and Waspaloy
Andersson, J.
Sjoberg, G. P.
[J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (01) : 49 - 59
[2] The effect of metal type and multi-layering on friction surfacing
Batchelor, AW
Jana, S
Koh, CP
Tan, CS
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 57 (1-2) : 172 - 181
[3] On the thermo-mechanical events during friction surfacing of high speed steels
Bedford, GM
Vitanov, VI
Voutchkov, II
[J]. SURFACE & COATINGS TECHNOLOGY, 2001, 141 (01) : 34 - 39
[4] Callister W.D, 2014, MAT SCI ENG INTRO, V9th, P276
[5] Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys
Chang, CI
Lee, CJ
Huang, JC
[J]. SCRIPTA MATERIALIA, 2004, 51 (06) : 509 - 514
[6] Microstructure and mechanical properties of friction welded alloy 718
Damodaram, R.
Raman, S. Ganesh Sundara
Rao, K. Prasad
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 560 : 781 - 786
[7] Didenko T, 2012, J FAIL ANAL PREV, V12, P314, DOI 10.1007/s11668-011-9501-9
[8] Dieter GE., 2017, Mechanical metallurgy, V3rd edition
[9] Characterization of the micro-welding process for repair of nickel base superalloys
Durocher, J.
Richards, N. L.
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2007, 16 (06) : 710 - 719
[10] DISLOCATION BEHAVIOR IN THE VICINITY OF GRAIN-BOUNDARIES IN FCC METALS AND ALLOYS
FUJITA, H
TOYODA, K
MORI, T
TABATA, T
ONO, T
TAKEDA, T
[J]. TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1983, 24 (04): : 195 - 204

← 1 2 3 4 →