Investigation of Quench Sensitivity of an Al-7.5Zn-1.7Mg-1.4Cu-0.12Zr Alloy

被引:7
作者
Xiong, Baiqing [1 ]
Li, Xiwu [1 ]
Zhang, Yongan [1 ]
Li, Zhihui [1 ]
Zhu, Baohong [1 ]
Wang, Feng [1 ]
Liu, Hongwei [1 ]
机构
[1] Gen Res Inst Nonferrous Met, State Key Lab Nonferrous Met & Proc, Beijing 100088, Peoples R China
来源
THERMEC 2011, PTS 1-4 | 2012年 / 706-709卷
关键词
Al-Zn-Mg-Cu alloy; Quench sensitivity; TIP curve; Precipitate;
D O I
10.4028/www.scientific.net/MSF.706-709.431
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present work, quench sensitivity of an A1-7.5Zn-1.7Mg-1.4Cu-0.12Zr alloy is investigated by temperature-time-property (TTP) curve and TEM analysis, comparing with traditional AA 7B04 and AA 7150. The results indicate that the nose temperature of TTP curve and the corresponding incubation period of the alloy, AA 7150 and AA 7B04 are about 290 degrees C/4.5s, 320 degrees C/2.6s and 335 degrees C/0.1s, respectively, The nose temperature of the alloy is the lowest among three alloys and the critical time at the nose temperature is the longest for the alloy, which is obvious that the alloy has lower quench sensitivity. Further TEM analysis shows that, with the prolongation of keeping time at the nose temperature, quench-induced precipitation phenomenon becomes obvious.
引用
收藏
页码:431 / 435
页数:5
相关论文
共 50 条
  • [1] One-Step Ageing Behavior of a Novel Al-7.5Zn-1.7Mg-1.4Cu-0.12Zr Alloy
    Li Xiwu
    Xiong Baiqing
    Zhang Yong'an
    Hua Cheng
    Li Zhihui
    Zhu Baohong
    Liu Hongwei
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (09) : 1589 - 1593
  • [2] In situ studies of microstructure evolution and properties of an Al-7.5Zn-1.7Mg-1.4Cu-0.12Zr alloy during retrogression and reaging
    Liu, Dongmei
    Xiong, Baiqing
    Bian, Fenggang
    Li, Zhihui
    Li, Xiwu
    Zhang, Yongan
    Wang, Feng
    Liu, Hongwei
    MATERIALS & DESIGN, 2014, 56 : 1020 - 1024
  • [3] Microstructure and Properties of an Al-7.5Zn-1.5Mg-1.4Cu-0.12Zr Alloy Forging
    Li, Xiwu
    Xiong, Baiqing
    Zhang, Yongan
    Li, Zhihui
    You, Jianghai
    Yin, Xiaohui
    Fan, Yunqiang
    Zhu, Baohong
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 335 - +
  • [4] Effect of aging treatment on properties and microstructure of an Al-7.5Zn-1.3Mg-1.4Cu-0.12Zr alloy
    Li, Xiwu
    Xiong, Baiqing
    Zhang, Yongan
    Wang, Guojun
    Li, Zhihui
    Zhu, Baohong
    Wang, Feng
    Liu, Hongwei
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 273 - 278
  • [5] Effects of germanium on quench sensitivity in Al-Zn-Mg-Zr alloy
    Lin, Lianghua
    Liu, Zhiyi
    Bai, Song
    Ying, Puyou
    Wang, Xiaohu
    MATERIALS & DESIGN, 2015, 86 : 679 - 685
  • [6] Influence of Fe and Si impurities on the quench sensitivity of Al-Zn-Mg-Cu alloy
    Zhang, X.-M. (xmzhang_cn@yahoo.cn), 1600, Beijing Institute of Aeronautical Materials (BIAM) : 41 - 47
  • [7] The Influence of the Zn/Mg Ratio on the Quench Sensitivity of Al-Zn-Mg-Cu Alloys
    Liu, Shichao
    Xu, Guofu
    Li, Yao
    Huang, Liansheng
    Tang, Lei
    Peng, Xiaoyan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (05) : 4214 - 4223
  • [8] The Influence of the Zn/Mg Ratio on the Quench Sensitivity of Al-Zn-Mg-Cu Alloys
    Shichao Liu
    Guofu Xu
    Yao Li
    Liansheng Huang
    Lei Tang
    Xiaoyan Peng
    Journal of Materials Engineering and Performance, 2022, 31 : 4214 - 4223
  • [9] Effects of the coherency of Al3Zr on the microstructures and quench sensitivity of Al-Zn-Mg-Cu alloys
    Pan, Tse-An
    Tzeng, Yu-Chih
    Bor, Hui-Yun
    Liu, Kuang-Hui
    Lee, Sheng-Long
    MATERIALS TODAY COMMUNICATIONS, 2021, 28
  • [10] Quench Sensitivity of Four Al-Zn-Mg-Cu Aluminum Alloys
    Li Chengbo
    Zhang Xinming
    Wang Shaoling
    Liu Shengdan
    Deng Yunlai
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (11) : 3374 - 3381