The critical conditions of brittle-ductile transition and the factors influencing the surface quality of brittle materials in ultra-precision grinding

被引:107
作者
Chen, MJ [1 ]
Zhao, QL [1 ]
Dong, S [1 ]
Li, D [1 ]
机构
[1] Harbin Inst Technol, Precis Engn Res Inst, Harbin 150001, Peoples R China
关键词
ultra-precision grinding; brittle-ductile transition; average grain size; grinding in the ductile mode;
D O I
10.1016/j.jmatprotec.2004.11.002
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Based on the indentation experiments under different loads, the critical conditions for the brittle-ductile transition of the brittle materials has been investigated from dynamic grinding, and the factors influencing the surface quality of the brittle materials have been analysed in ultra-precision grinding theoretically. After having carried out the grinding experiments of the brittle materials, it was shown that influence of the average grain size of the diamond wheel on the surface quality is prominent. Compared to the wheel grain size, influence of wheel speed and feed rate on the surface quality is in secondary; these experimental results were consistent with the theoretical analysis. In the case of upsilon(s) = 1200 m/min, f= 0-20 mu m/rev, a(p) = 0. 1-10 mu m, only when the average grain size of the diamond wheel is less than 10 mu m, can the super-smooth surface (Ra: 6.200 nm, rms: 8.201 nm) be obtained by grinding in the ductile mode. (c) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码:75 / 82
页数:8
相关论文
共 11 条
[1]  
[Anonymous], 1993, CIRP ANN-MANUF TECHN
[2]   CHEMOMECHANICAL EFFECTS IN DUCTILE-REGIME MACHINING OF GLASS [J].
BIFANO, TG ;
DEPIERO, DK ;
GOLINI, D .
PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1993, 15 (04) :238-247
[3]   MICROINDENTATION ANALYSIS OF DI-AMMONIUM HYDROGEN CITRATE SINGLE-CRYSTALS [J].
GEORGE, J ;
PETER, G .
JOURNAL OF MATERIALS SCIENCE, 1985, 20 (09) :3150-3156
[4]   A UNIQUE MACHINE FOR GRINDING LARGE, OFF-AXIS OPTICAL-COMPONENTS - THE OAGM-2500 [J].
LEADBEATER, PB ;
CLARKE, M ;
WILLSMOREN, WJ ;
WILSON, TJ .
PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1989, 11 (04) :191-196
[5]  
LIN HY, 1997, PROGR PRECISION ENG, P536
[6]  
Mingjun C., 2000, HIGH TECHNOL LETT, V2, P64
[7]  
Mingjun CHEN, 2001, CHINESE J MECH ENG, V37, P1
[8]   Next generation optics manufacturing technologies [J].
Pollicove, HM .
ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGY 2000, 2000, 4231 :8-15
[9]  
REICHENBACH GS, 1956, T ASME, V78, P847
[10]  
SALM SC, 1992, MODERN GRINDING PROC