Fatigue testing on rotary friction-welded joints between solid ABS and 3D-printed PLA and ABS

被引:25
作者
Bagheri, Abbasali [1 ]
Parast, Mohammad Sadegh Aghareb [1 ]
Kami, Abdolvahed [1 ]
Azadi, Mohammad [1 ]
Asghari, Vahid [2 ]
机构
[1] Semnan Univ, Fac Mech Engn, Semnan, Iran
[2] Iran Tech & Vocat Training Org, Sari, Mazandaran, Iran
关键词
Rotary friction welding; Friction welding; Fatigue; Polymers; ABS; PLA; Additive manufacturing; 3D printing; Fused filament fabrication; BEHAVIOR; SINGLE; PMMA;
D O I
10.1016/j.euromechsol.2022.104713
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Additive manufacturing is increasingly used for producing a variety of components. These components are often not self-contained, and therefore to form a working assembly, they must be attached to other components. In this study, ABS and PLA, two commonly used 3D printing materials, were 3D printed utilizing a Fused Deposition Modeling (FDM) machine. The 3D-printed parts were then rotary friction-welded to solid (non-printed) ABS parts. Rotating-beam fatigue experiments at various stress levels were used to evaluate the fatigue strength of these weld joints. Fatigue testing was also carried out on solid ABS/solid ABS and non-welded ABS samples. Furthermore, a comprehensive analysis of the fracture surfaces was performed employing field emission scanning electron microscopy (FESEM). According to the results, non-welded ABS, solid ABS/solid ABS, solid ABS/3Dprinted ABS, and solid ABS/3D-printed PLA had the best fatigue performance in this order.
引用
收藏
页数:14
相关论文
共 50 条
[31]   COMPARATIVE ANALYSIS OF STRENGTH PROPERTIES IN 3D-PRINTED PLA AND ABS STRUCTURES USING DNN-WOA PREDICTION MODEL [J].
Kulkarni, Mihir Hemant ;
Khanzode, Vivek .
SURFACE REVIEW AND LETTERS, 2025,
[32]   Dynamic mechanical and thermal analysis of 3D-printed ABS/POE blends for tunable mechanical properties [J].
Xia, Lingqin ;
Wang, Ruiquan ;
Zheng, Luyu ;
Chen, Guang ;
Fang, Yihang .
IRANIAN POLYMER JOURNAL, 2025, 34 (04) :561-570
[33]   A New ABS Conductive Material to develop Fully 3D-Printed Patch Antennas [J].
Jimenez, Javier ;
Irigoyen, Joseba ;
Aresti, Maite ;
Ederra, Inigo ;
Bravo, Javier ;
Iriarte, Juan Carlos .
2023 17TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, EUCAP, 2023,
[34]   Effects of multiple sterilizations and natural aging on the mechanical behavior of 3D-printed ABS [J].
Popescu, Diana ;
Baciu, Florin ;
Vlasceanu, Daniel ;
Cotrut, Cosmin Mihai ;
Marinescu, Rodica .
MECHANICS OF MATERIALS, 2020, 148
[35]   Analysis of Notch Effect in 3D-Printed ABS Fracture Specimens Containing U-Notches [J].
Cicero, Sergio ;
Martinez-Mata, Victor ;
Alonso-Estebanez, Alejandro ;
Castanon-Jano, Laura ;
Arroyo, Borja .
MATERIALS, 2020, 13 (21) :1-13
[36]   Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials [J].
Torrado Perez A.R. ;
Roberson D.A. ;
Wicker R.B. .
Torrado Perez, A.R. (artorradoperez@miners.utep.edu), 1600, Springer Science and Business Media, LLC (14) :343-353
[37]   Effects of gamma irradiation on mechanical properties of 3D-printed carbon fiber-reinforced ABS [J].
McTaggart, Robert ;
Rankouhi, Behzad ;
Letcher, Todd .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (7-8) :1917-1927
[38]   Fracture assessment of blunt V-notched 3D-printed ABS: Proposing a new specimen for testing and different criteria for prediction [J].
Torabi, A. R. ;
Ghanbari, Amin ;
Choupani, N. ;
Ayatollahi, M. R. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 134
[39]   The effect of natural Gongura roselle fiber on the mechanical properties of 3D printed ABS and PLA composites [J].
Appusamy, Anandha Moorthy ;
Nanjappan, Natarajan ;
Eswaran, Prakash ;
Subramanian, Madheswaran .
POLIMERY, 2022, 67 (03) :119-124
[40]   Effects of 3D-printed PLA material with different filling densities on coefficient of friction performance [J].
Sirin, Senol ;
Aslan, Enes ;
Akincioglu, Gulsah .
RAPID PROTOTYPING JOURNAL, 2023, 29 (01) :157-165