Flow behaviour of autoclaved, 20% cold worked, Zr-2.5Nb alloy pressure tube material in the temperature range of room temperature to 800 °C

被引：13

作者：

Dureja, A. K. ^{[1
]}

Sinha, S. K. ^{[1
]}

Srivastava, Ankit ^{[1
]}

Sinha, R. K. ^{[1
]}

Chakravartty, J. K. ^{[2
]}

Seshu, P. ^{[3
]}

Pawaskar, D. N. ^{[3
]}

机构：

[1] Bhabha Atom Res Ctr, Reactor Design & Dev Grp, Bombay 85, Maharashtra, India

[2] Bhabha Atom Res Ctr, Mat Grp, Bombay 85, Maharashtra, India

[3] Indian Inst Technol, Dept Mech Engn, Bombay 76, Maharashtra, India

来源：

JOURNAL OF NUCLEAR MATERIALS | 2011年 / 412卷 / 01期

关键词：

WT-PERCENT-NB; ZIRCONIUM ALLOYS; SUPERPLASTIC BEHAVIOR; STRAIN-RATE; DEFORMATION; FABRICATION; EVOLUTION;

D O I：

10.1016/j.jnucmat.2011.01.023

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Pressure tube material of Indian Heavy Water Reactors is 20% cold-worked and stress relieved Zr-2.5Nb alloy. Inherent variability in the process parameters during the fabrication stages of pressure tube and also along the length of component have their effect on micro-structural and texture properties of the material, which in turn affect its strength parameters (yield strength and ultimate tensile strength) and flow characteristics. Data of tensile tests carried out in the temperature range from room temperature to 800 degrees C using the samples taken out from a single pressure tube have been used to develop correlations for characterizing the strength parameters' variation as a function of axial location along length of the tube and the test temperature. Applicability of Ramberg-Osgood, Holloman and Voce's correlations for defining the post yield behaviour of the material has been investigated. Effect of strain rate change on the deformation behaviour has also been studied. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：22 / 29

页数：8

共 43 条

[21] Ludwik P., 1909, Elemente der technologischen mechanik, DOI DOI 10.1007/978-3-662-40293-1
[22] TEMPERATURE AND RATE CONDITIONS FOR DEVELOPMENT OF SUPERPLASTICITY IN ZR-2.5-PERCENT NB ALLOY
MAKHUTOV, NA
FEDOROVICH, LP
CHIRKIN, AV
PARFENOV, BG
TANANOV, AI
[J]. METAL SCIENCE AND HEAT TREATMENT, 1982, 24 (7-8) : 491 - 494
[23] Meyers M.A., 1984, MECH METALLURGY PRIN
[24] DEFORMATION MECHANISMS IN SUPERPLASTICITY
MUKHERJEE, AK
[J]. ANNUAL REVIEW OF MATERIALS SCIENCE, 1979, 9 : 191 - 217
[25] *NFC, 2004, PRESS TUB EV REP
[26] ELASTIC-CONSTANTS OF ZIRCONIUM ALLOYS
NORTHWOOD, DO
LONDON, IM
BAHEN, LE
[J]. JOURNAL OF NUCLEAR MATERIALS, 1975, 55 (03) : 299 - 310
[27] SUPERPLASTICITY IN ZR-2.5PERCENT NB ALLOY
NUTTALL, K
[J]. SCRIPTA METALLURGICA, 1976, 10 (09): : 835 - 840
[28] Padmanabhan K.A., 1980, Superplasticity, Mechanical and Structural Aspects, Environmental Effects, Fundamentals and Applications
[29] Ramberg W., 1943, Description of Stress-Strain Curves by Three Parameters, V902
[30] RIVKIN EY, 1974, STRENGTH ZIRCONIUM A, P30

← 1 2 3 4 5 →