Development of bio based lubricant from Schlichera oleosa with effect of load during tribological analysis

被引:2
|
作者
Singh, Yashvir [1 ]
Negi, Prateek [1 ]
Yadav, Avinash [1 ]
Tripathi, Ritika [1 ]
机构
[1] Graph Era Deemed Univ, Dept Mech Engn, Dehra Dun, Uttarakhand, India
关键词
Friction; Wear; Load; Schlichera oleosa oil; Lubricant; Sliding speed; OIL; BIODIESEL; FRICTION; PONGAMIA;
D O I
10.1016/j.matpr.2020.12.1240
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The pollution has been increased around the globe due to the usage of petroleum products. In providing lubrication, synthetic lubricants are in use but their degradation is harmful due to their high toxicity. In order to reduce their application, non-edible vegetable oils are suitable alternatives. In this study, Schlichera oleosa was used as bio based lubricant. In this process, different loads were applied at constant sliding speed. At higher loads, more amount of friction and wear was observed. The reduction in friction and wear was obtained during the application of Schlichera oleosa bio based lubricant in comparison to the Schlichera oleosa oil. Also, minimum wear scar was formed during utilization of bio based lubricant. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Technological Advancements in Materials Science and Manufacturing.
引用
收藏
页数:3
相关论文
共 50 条
  • [1] Michelia Champaca based bio lubricant and its application during tribological behaviour analysis
    Singh, Yashvir
    Negi, Prateek
    Yadav, Avinash
    Tripathi, Ritika
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 10510 - 10512
  • [2] Moringa Oleifera: Bio based lubricant development from a novel feedstock for tribological characterization
    Singh, Yashvir
    Sharma, Abhishek
    Singh, Nishant Kumar
    Singla, Amneesh
    Upadhyay, Rajeev Kumar
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (01) : 663 - 675
  • [3] Development and tribological characteristics of bio-based lubricant from Jatropha curcas oil
    Singh, Yashvir
    Singh, Anshul Kumar
    Singla, Amneesh
    Upadhyay, Avani Kumar
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2017, 39 (16) : 1725 - 1732
  • [4] Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis
    Yashvir Singh
    Nishant Kumar Singh
    Abhishek Sharma
    Irfan Anjum Badruddin
    Sarfaraz Kamangar
    Waste and Biomass Valorization, 2023, 14 : 487 - 503
  • [5] Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis
    Singh, Yashvir
    Singh, Nishant Kumar
    Sharma, Abhishek
    Anjum Badruddin, Irfan
    Kamangar, Sarfaraz
    WASTE AND BIOMASS VALORIZATION, 2023, 14 (02) : 487 - 503
  • [6] Effect of bio-lubricant on tribological characteristics of steel
    Habibullah, M.
    Masjuki, H. H.
    Kalam, M. A.
    Ashraful, A. M.
    Habib, M. A.
    Mobarak, H. M.
    10TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (ICME 2013), 2014, 90 : 740 - 745
  • [7] The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant
    Zulkifli, N. W. M.
    Kalam, M. A.
    Masjuki, H. H.
    Al Mahmud, K. A. H.
    Yunus, R.
    TRIBOLOGY TRANSACTIONS, 2014, 57 (03) : 408 - 415
  • [8] Development of bio-based lubricant from modified desert date oil (balanites aegyptiaca) with copper nanoparticles addition and their tribological analysis
    Singh, Yashvir
    Sharma, Abhishek
    Singh, Nishant Kumar
    Chen, Wei-Hsin
    FUEL, 2020, 259 (259)
  • [9] Influence of Temperature on the Tribological Behavior of Bio-Ester Based Lubricant
    Garg, Pooja
    Kumar, Ajay
    Thakre, G. D.
    Arya, P. K.
    Jain, A. K.
    ADVANCED SCIENCE LETTERS, 2016, 22 (11) : 3805 - 3809
  • [10] Madhuca Indica (Mahua): A novel feedstock for bio based lubricant application treated with trimethylolpropane and tribological analysis
    Singh, Yashvir
    Singh, Nishant Kumar
    Sharma, Abhishek
    Kishore, Chandra
    Raturi, Anuj
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2023, 21 (01) : 339 - 349