Preparation of a high spectral emissivity TaSi2-based hybrid coating on SiOC-modified carbon-bonded carbon fiber composite by a flash sintering method

被引：23
作者：
Du, Bin [1 ]
Zhou, Shitong [1 ]
Zhang, Xinghong [1 ]
Hong, Changqing [1 ]
Qu, Qiang [2 ]
机构：
[1] Harbin Inst Technol, Ctr Composite Mat & Struct, Harbin 150001, Heilongjiang, Peoples R China
[2] China Acad Launch Vehicle Technol, Beijing 100076, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2018年 / 350卷
基金：
中国国家自然科学基金;
关键词：
High spectral emissivity; TaSi2- and MoSi2-based coatings; SiOC/CBCF composites; OXIDATION PROTECTION; SPRAY DEPOSITION; INSULATIONS; TEMPERATURE; RESISTANCE; BEHAVIOR;
D O I：
10.1016/j.surfcoat.2018.07.019
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The most recent and innovative metal disilicide-based hybrid coatings are used for protecting carbon fiber-based composites in aerospace application. Here, we investigate a high emissivity coating on SiOC-modified carbon bonded carbon fiber composites (SiOC/CBCF) for thermal protection material. Both tantalum silicide (TaSi2) and molybdenum silicide (MoSi2)-based coatings are prepared on SiOC/CBCF composites using flash sintering method, and the emissivity value of MoSi2-based coating is higher than that of TaSi2-based coating. Significantly, improvement the density of the coating has a positive role on emissivity resulting in MoSi2-based coating increases about 7.2% at 400 degrees C and 11.5% at 1000 degrees C, respectively; TaSi2-based coating increases about 15.4% at 400 degrees C and 2.6% at 1000 degrees C. After exposure to 1500 degrees C for 60 min in air, the emissivity values of the coated samples are also investigated.
引用
收藏
页码：146 / 153
页数：8
相关论文
共 32 条
  • [31] Modeling the effects of surface roughness on the emissivity of aluminum alloys
    Wen, Chang-Da
    Mudawar, Issam
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (23-24) : 4279 - 4289
  • [32] Preparation of a multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites by a rapid sintering method
    Xu, Baosheng
    Hong, Changqing
    Qu, Qiang
    Zhang, Xinghong
    Han, Jiecai
    Li, Ning
    Gui, Kaixuan
    Zhao, Guangdong
    Liu, Chen
    [J]. SURFACE & COATINGS TECHNOLOGY, 2015, 270 : 109 - 116
1234