A new kind of age hardenable martensitic stainless steel with high strength and toughness

被引：9
|
作者：
Akhtar, F. [1 ]
Lian, Y. D. [1 ]
Islam, S. H. [1 ]
Guo, S. J. [1 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
来源：
IRONMAKING & STEELMAKING | 2007年 / 34卷 / 04期
关键词：
martensitic stainless steel; alloy element; precipitation; corossion resistant; heat treatment;
D O I：
10.1179/174328107X155303
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Following analysis of typical age hardenable martensitic stainless steels, a new kind of maraging stainless was developed. The new maraging stainless steel showed high strength, ultimate tensile strength (UTS)= 1670 MPa, high toughness, K-IC=83.9 MPa ml(1/2) and hardness as high as 478 HV in the age hardened condition. Microstructural study with an optical and transmission electron microscope revealed the typical microstructure of age hardenable stainless steel containing lath martensite and precipitates. Ti,Ni precipitates were identified by transmission electron microscopy, which were responsible for the increase in mechanical properties after age hardening. The results of natural salt spray test showed that the corrosion resistance of new maraging stainless steel approached to the corrosion resistance of 304L stainless steel.
引用
收藏
页码：285 / 289
页数：5
相关论文
共 50 条
  • [21] Effect of Toughness and Ductility on the Cavitation Erosion of Martensitic Stainless Steel
    Zhao, Lianqing
    Hu, Hongxiang
    Guo, Xuming
    METALS, 2023, 13 (01)
  • [22] Fracture toughness of martensitic stainless steel resistance spot welds
    Pouranvari, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 680 : 97 - 107
  • [23] NEW HIGH-STRENGTH STAINLESS STEEL
    FONTANA, MG
    INDUSTRIAL AND ENGINEERING CHEMISTRY, 1956, 48 (12): : A53 - A54
  • [24] Development of a New Kind of High Strength Spring Steel
    Dexiang XU
    Journal of Materials Science & Technology, 2004, (05) : 557 - 560
  • [25] Development of a new kind of high strength spring steel
    Xu, DX
    Yin, ZD
    Liu, DF
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2004, 20 (05) : 557 - 560
  • [26] Design of a low-alloy high-strength and high-toughness martensitic steel
    Zhao, Yan-jun
    Ren, Xue-ping
    Yang, Wen-chao
    Zang, Yue
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2013, 20 (08) : 733 - 740
  • [27] Design of a low-alloy high-strength and high-toughness martensitic steel
    Yan-jun Zhao
    Xue-ping Ren
    Wen-chao Yang
    Yue Zang
    International Journal of Minerals, Metallurgy, and Materials, 2013, 20 : 733 - 740
  • [28] Design of a low-alloy high-strength and high-toughness martensitic steel
    Yan-jun Zhao
    Xue-ping Ren
    Wen-chao Yang
    Yue Zang
    InternationalJournalofMineralsMetallurgyandMaterials, 2013, 20 (08) : 733 - 740
  • [29] Hydrogen embrittlement of high strength martensitic stainless steel: Effect of cathodic polarisation
    Effetto della polarizzazione catodica sull'infragilimento da idrogeno di un acciaio inossidabile martensitico a elevata resistenza
    1600, Associazione Italiana di Metallurgia (108):
  • [30] Fatigue strength improvement of high strength martensitic stainless steel by dynamic ion mixing process
    Nakayama, H
    Fukui, S
    Tanaka, T
    FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 1951 - 1956
12345