Evaluation of Microstructure and Wear Properties of Ti-6Al-4V Alloy Plasma Carbonized at Different Temperatures

被引：5
作者：
Zhang Yong [1 ]
Wei Qiulan [2 ]
Xing Yazhe [1 ]
Jiang Chaoping [1 ]
Li Xinghang [1 ]
Zhao Zhiyu [1 ]
机构：
[1] Changan Univ, Sch Mat Sci & Engn, Xian 710064, Peoples R China
[2] Shaanxi Coll Commun Technol, Dept Automot Engn, Xian 710018, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2015年 / 30卷 / 03期
基金：
中国国家自然科学基金;
关键词：
Ti-6Al-4V; plasma carburizing; layer; wear resistance; DRY SLIDING WEAR; TITANIUM-ALLOYS; HYDROGEN; BEHAVIOR; FATIGUE; TIME;
D O I：
10.1007/s11595-015-1202-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti-6Al-4V (TC4) alloys were plasma carbonized at different temperatures (900, 950, and 1 000 degrees C) for duration of 3 h. Graphite rod was employed as carbon supplier to avoid the hydrogen brittleness which is ubiquitous in traditional gas carbonizing process. Two distinguished structures including a thin compound layer (carbides layer) and a thick layer with the mixed microstructure of TiC and the alpha-Ti in carburing layer were formed during carburizing. Furthermore, it was found that the microstructure and the properties of TC4 alloy were significantly related to the carbonizing temperature. The specimen plasma carbonized at 950 degrees C obtained maximum value both in the hardness and wear resistance.
引用
收藏
页码：631 / 638
页数：8
相关论文
共 50 条
  • [31] Evaluation of electrochemical properties of modified Ti-6Al-4V ELI alloy
    Szewczenko, Janusz
    Pochrzast, Magdalena
    Walke, Witold
    PRZEGLAD ELEKTROTECHNICZNY, 2011, 87 (12B): : 177 - 180
  • [32] Effects of electrolyte concentration on the microstructure and properties of plasma electrolytic oxidation coatings on Ti-6Al-4V alloy
    Lu, Sisi
    Wang, Qun
    Ye, Renfeng
    Ramachandran, Chidambaram Seshadri
    SURFACE & COATINGS TECHNOLOGY, 2019, 375 : 864 - 876
  • [33] Effect of Nickel Addition on Microstructure and Mechanical Properties of the Spark Plasma Sintered Ti-6Al-4V Alloy
    Muthuchamy, A.
    Rajadurai, M.
    Annamalai, A. Raja
    Agrawal, Dinesh K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (08) : 2127 - 2134
  • [34] Effect of Microstructure on High-Cycle Fatigue Properties of Ti-6Al-4V Alloy Forging at Cryogenic Temperatures
    Yuri, T.
    Ono, Y.
    Ogata, T.
    Sunakawa, H.
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 60, 2014, 1574 : 27 - 33
  • [35] Wear properties of nonhydrogenated, hydrogenated, and dehydrogenated Ti6Al4V alloy
    Yuan, Bao-Guo
    Yu, Hai-Ping
    Li, Chun-Feng
    Sun, Dong-Li
    RARE METALS, 2018, 37 (07) : 574 - 578
  • [36] Carburizing of Ti-6Al-4V alloy: Structure, growth mechanism and wear performance
    Zhang, He
    Zhang, Shigang
    Zhang, Mingjun
    An, Jian
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 7059 - 7071
  • [37] Microstructure and Wear Resistance of a Composite Coating Prepared by Laser Alloying with Ni-Coated Graphite on Ti-6Al-4V Alloy
    Yu, Huijun
    Lu, Lu
    Wang, Zifan
    Chen, Chuanzhong
    MATERIALS, 2022, 15 (16)
  • [38] Wear Characteristics of Ti-6Al-4V Alloy at 20-400°C
    Cui, X. H.
    Mao, Y. S.
    Wei, M. X.
    Wang, S. Q.
    TRIBOLOGY TRANSACTIONS, 2012, 55 (02) : 185 - 190
  • [39] Microstructure and superplasticity of laser welded Ti-6Al-4V alloy
    Cheng, Donghai
    Huang, Jihua
    Zhao, Xingke
    Zhang, Hua
    MATERIALS & DESIGN, 2010, 31 (01): : 620 - 623
  • [40] Effect of hydrogen on the superplasticity and microstructure of Ti-6Al-4V alloy
    Shaoqing, Zhang, 1600, Elsevier Science S.A., Lausanne, Switzerland (218):
12345