Experimental investigation of parameter-dependent analytical cutting force models for the simulation of the milling process

被引:0
|
作者
Riviere-Lorphevre, Edouard [1 ]
Filippi, Enrico [1 ]
Dehombreux, Pierre [1 ]
机构
[1] 20 Pl Parc, B-7000 Mons, Belgium
来源
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS | 2011年 / 1353卷
关键词
Design of experiment; milling; cutting forces; analytical model;
D O I
10.1063/1.3589577
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Optimisation of the milling process is often based on simplified models of the cutting forces generated during the machining operations. Most of the simulation algorithms use simple linear relationship between cutting forces and the undeformed section of the chip. The coefficients of those models (often called specific pressure) are considered to be constant with respect to the other parameters. The variation of those coefficients as a function of the cutting speed or the chip thickness has been experimentally observed but most of the authors neglect this effect for simplicity sake. This paper proposes an experimental method to take the variation of these cutting coefficients with respect to cutting parameters into account. Analysis of variance is performed to identify the significant parameters. A design of experiment approach is followed to select the adequate experimental points to ensure maximal precision with the minimal number of machining tests.
引用
收藏
页码:579 / 584
页数:6
相关论文
共 50 条
  • [1] Modelling, simulation and experimental investigation of cutting forces during helical milling operations
    Liu, Changyi
    Wang, Gui
    Dargusch, Matthew S.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 63 (9-12): : 839 - 850
  • [2] Modelling, simulation and experimental investigation of cutting forces during helical milling operations
    Changyi Liu
    Gui Wang
    Matthew S. Dargusch
    The International Journal of Advanced Manufacturing Technology, 2012, 63 : 839 - 850
  • [3] The Evaluation of Analytical Models for Orthogonal Cutting Process
    Sereshk, M. R. Vaziri
    Heydarizadeh, P.
    Mostafavi, S. M.
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON ELECTRICAL, AUTOMATION AND MECHANICAL ENGINEERING (EAME 2015), 2015, 13 : 502 - 505
  • [4] An analytical approach on stochastic model for cutting force prediction in milling ceramic matrix composites
    Zhang, Xuewei
    Yu, Tianbiao
    Zhao, Ji
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 168
  • [5] Cutting force and surface roughness depend on the tool path used in side milling: an experimental investigation
    Rodrigo Henriques Lopes da Silva
    Amauri Hassui
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 1445 - 1455
  • [6] Experimental Investigation and Numerical Analysis Regarding the Influence of Cutting Parameters on the Asphalt Milling Process
    Petrescu, Marius Gabriel
    Dumitru, Teodor
    Laudacescu, Eugen
    Tanase, Maria
    MATERIALS, 2024, 17 (14)
  • [7] Cutting force and surface roughness depend on the tool path used in side milling: an experimental investigation
    Lopes da Silva, Rodrigo Henriques
    Hassui, Amauri
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4): : 1445 - 1455
  • [8] In-process tool wear estimation in milling using cutting force model
    Choudhury, SK
    Rath, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 99 (1-3) : 113 - 119
  • [9] THE CONSTRUCTION OF THE MILLING PROCESS SIMULATION MODELS
    Slusarczyk, L.
    PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2016, 2016, 10031
  • [10] Prediction of Milling Force Based on Numerical Simulation of Oblique Cutting
    Wang, B. S.
    Zuo, J. M.
    Wang, M. L.
    Hou, J. M.
    MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (10) : 1011 - 1016