Formulation and assessment of an enhanced finite element procedure for the analysis of delamination growth phenomena in composite structures

被引：49
作者：
Pietropaoli, Elisa [1 ]
Riccio, Aniello [1 ]
机构：
[1] CIRA Italian Aerosp Res Ctr, I-81043 Capua, Italy
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2011年 / 71卷 / 06期
关键词：
Layered structures; Delamination; Buckling; Damage mechanics; Finite element analysis; Damage tolerance; CRACK-CLOSURE TECHNIQUE; STRESS INTENSITY FACTORS; RELEASE RATE CALCULATION; FRONT;
D O I：
10.1016/j.compscitech.2011.01.026
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
An existing procedure based on the combined use of the Virtual Crack Closure Technique and of a fail release approach for the analysis of delamination growth phenomena in composite structures has been enhanced with a front-tracing algorithm and suitable expressions for the evaluation of the Strain Energy Release Rate when dealing with non-smoothed delamination fronts. The enhanced procedure has been implemented into a commercial finite element software by means of user subroutines and applied to the analysis of a composite stiffened panel with an embedded delamination under compressive load. The effectiveness and robustness of the enhanced procedure have been assessed by comparing literature experimental data and numerical results obtained by using different mesh densities in the damaged area (global/local approach). (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：836 / 846
页数：11
相关论文
共 50 条
[41]   Spectral finite element method for wave propagation analysis in smart composite beams containing delamination [J].
Nanda, Namita .
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2020, 92 (03) :440-451
[42]   Finite Element Analysis to Investigate the Influence of Delamination Size, Stacking Sequence and Boundary Conditions on the Vibration Behavior of Composite Plate [J].
Imran, M. ;
Khan, R. ;
Badshah, S. .
IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2019, 16 (01) :11-21
[43]   Progressive delamination growth analysis using discontinuous layered element [J].
Hosseini-Toudeshky, Hossein ;
Hosseini, Saman ;
Mohammadi, Bijan .
COMPOSITE STRUCTURES, 2010, 92 (04) :883-890
[44]   FINITE ELEMENT MODELS FOR THE ONSET AND GROWTH OF DELAMINATION IN CFRP LAMINATES [J].
Bonhomme, Jorge ;
Mollon, Victoria ;
Elmarakbi, Ahmed M. ;
Vina, Jaime ;
Argueelles, Antonio .
ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2012,
[45]   Role of CNTs on the Resistance to Delamination Growth in Three-Phase FRP Laminates with Embedded Delamination: Finite Element Analysis [J].
Rao C.A. ;
Murthy K.S.R.K. ;
Chakraborty D. .
Journal of The Institution of Engineers (India): Series C, 2024, 105 (01) :115-126
[46]   Influence of delamination growth and contact phenomena on the compressive behaviour of composite panels [J].
Perugini, P ;
Riccio, A ;
Scaramuzzino, F .
JOURNAL OF COMPOSITE MATERIALS, 1999, 33 (15) :1433-1456
[47]   Partial delamination modeling in composite beams using a finite element method [J].
Kumar, S. Keshava ;
Ganguli, Ranjan ;
Harursampath, Dineshkumar .
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2013, 76 :1-12
[48]   Fatigue driven delamination in composite structures: Definition and assessment of a novel fracture mechanics based computational tool [J].
Russo, Angela ;
Riccio, Aniello ;
Palumbo, Concetta ;
Sellitto, Andrea .
INTERNATIONAL JOURNAL OF FATIGUE, 2023, 166
[49]   Finite element modelling of composite structures under crushing load [J].
Chiu, Louis N. S. ;
Falzon, Brian G. ;
Boman, Romain ;
Chen, Bernard ;
Yan, Wenyi .
COMPOSITE STRUCTURES, 2015, 131 :215-228
[50]   Finite Element Analysis of the Stability (Buckling and Post-Buckling) of Composite Laminated Structures: Well Established Procedures and Challenges [J].
Pietropaoli, Elisa ;
Riccio, Aniello .
APPLIED COMPOSITE MATERIALS, 2012, 19 (01) :79-96
12345