Formulation and assessment of an enhanced finite element procedure for the analysis of delamination growth phenomena in composite structures

被引：49

作者：

Pietropaoli, Elisa ^{[1
]}

Riccio, Aniello ^{[1
]}

机构：

[1] CIRA Italian Aerosp Res Ctr, I-81043 Capua, Italy

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2011年 / 71卷 / 06期

关键词：

Layered structures; Delamination; Buckling; Damage mechanics; Finite element analysis; Damage tolerance; CRACK-CLOSURE TECHNIQUE; STRESS INTENSITY FACTORS; RELEASE RATE CALCULATION; FRONT;

D O I：

10.1016/j.compscitech.2011.01.026

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

An existing procedure based on the combined use of the Virtual Crack Closure Technique and of a fail release approach for the analysis of delamination growth phenomena in composite structures has been enhanced with a front-tracing algorithm and suitable expressions for the evaluation of the Strain Energy Release Rate when dealing with non-smoothed delamination fronts. The enhanced procedure has been implemented into a commercial finite element software by means of user subroutines and applied to the analysis of a composite stiffened panel with an embedded delamination under compressive load. The effectiveness and robustness of the enhanced procedure have been assessed by comparing literature experimental data and numerical results obtained by using different mesh densities in the damaged area (global/local approach). (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：836 / 846

页数：11

共 50 条

[31] New Finite-Element Formulation for Buckling Analysis of Cracked Structures [J].

Ranjbaran, A. ;

Ranjbaran, M. .

JOURNAL OF ENGINEERING MECHANICS, 2014, 140 (05)

[32] FINITE ELEMENT ANALYSIS OF BENDING-STIFF COMPOSITE CONICAL SHELLS WITH MULTIPLE DELAMINATION [J].

Dey, Sudip ;

Karmakar, Amit .

JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, 2012, 7 (02) :213-224

[33] Genetic algorithms and finite element analysis in optimization of composite structures [J].

Muc, A ;

Gurba, W .

COMPOSITE STRUCTURES, 2001, 54 (2-3) :275-281

[34] Parametric effects on embedded delamination buckling in composite structures using the EAS three-dimensional element [J].

Park, Dae-Yong ;

Lee, Sang-Youl .

COMPOSITES PART B-ENGINEERING, 2012, 43 (04) :1800-1812

[35] Three dimension crack tip element method for the delamination analysis of composite laminate structures [J].

Beijing Aeronautical Science and Technology Research Institute, Future Science and Technology Park, Changping District, Beijing 102211, China .

Xu, J. (zhangtian1@comnc.cc), 2013, Beijing University of Aeronautics and Astronautics (BUAA) (30)

[36] Rotational interface formulation for delamination analysis of composite laminates [J].

Jansson, NE ;

Larsson, R .

COMPUTERS & STRUCTURES, 2003, 81 (30-31) :2705-2716

[37] Finite element formulation for dynamics of delaminated composite beams with piezoelectric actuators [J].

Perel, VY ;

Palazotto, AN .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2002, 39 (17) :4457-4483

[38] Finite Elements Modeling of the Delamination Process at Polymeric Composite Structures [J].

Roxana, Gheta ;

Dan, Nitoi ;

Gabriel, Iacobescu ;

Constantin, Opran ;

Constantin, Petriceanu .

MACROMOLECULAR SYMPOSIA, 2020, 389 (01)

[39] Finite element reliability analysis of edge delamination onset due to interlaminar stresses in composite laminates [J].

Delbariani-Nejad, Ali ;

Farrokhabadi, Amin ;

Fotouhi, Mohammad .

COMPOSITE STRUCTURES, 2022, 288

[40] Finite element analysis of postbuckling and delamination of composite laminates using virtual crack closure technique [J].

Liu, P. F. ;

Hou, S. J. ;

Chu, J. K. ;

Hu, X. Y. ;

Zhou, C. L. ;

Liu, Y. L. ;

Zheng, J. Y. ;

Zhao, A. ;

Yan, L. .

COMPOSITE STRUCTURES, 2011, 93 (06) :1549-1560

← 1 2 3 4 5 →