Heat transfer enhancement in a parallel, finless heat exchanger using a longitudinal vortex generator, Part A: Numerical investigation

被引：21

作者：

Li, Jiyang ^{[1
]}

Dang, Chaobin ^{[1
]}

Hihara, Eiji ^{[1
]}

机构：

[1] Univ Tokyo, Dept Human & Engn Environm Studies, 5-1-5 Kashiwanoha, Kashiwa, Chiba 2778563, Japan

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2019年 / 128卷

关键词：

Finless parallel heat exchanger; Longitudinal vortex generator; Numerical simulation; FINNED OVAL TUBE; RECTANGULAR CHANNEL; PRESSURE-DROP; DELTA WINGLET; PAIR;

D O I：

10.1016/j.ijheatmasstransfer.2018.06.049

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A design for a parallel, finless, flat-tube heat exchanger is proposed and assessed for high performance in air conditioners. In this design, a longitudinal vortex generator (LVG) plate consisting of thousands of LVGs is placed in front of the finless heat exchanger in the airflow path, thus resulting in improved heat transfer. The LVG was installed in front of the finless heat exchanger with a gap of about 1 mm, which ensured that under wet and frost/defrost conditions, the condensed or defrosted water would not drip onto the LVG. Therefore, the drain and defrosting performance was not affected by the LVG. A novel, double-triangular shape was developed for the LVG using a numerical method, and some parameters which significantly affect the performance of LVG were numerically analyzed. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：87 / 97

页数：11

共 24 条

[1] Analysis of heat transfer and pressure drop characteristics in an offset strip fin heat exchanger
Bhowmik, H.
Lee, Kwan-Soo
[J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (03) : 259 - 263
[2] HEAT-TRANSFER ENHANCEMENT IN FIN-TUBE HEAT-EXCHANGERS BY WINGLET TYPE VORTEX GENERATORS
BISWAS, G
MITRA, NK
FIEBIG, M
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1994, 37 (02) : 283 - 291
[3] Heat transfer enhancement of finned oval tubes with staggered punched longitudinal vortex generators
Chen, Y
Fiebig, M
Mitra, NK
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2000, 43 (03) : 417 - 435
[4] Conjugate heat transfer of a finned oval tube with a punched longitudinal vortex generator in form of a delta winglet - parametric investigations of the winglet
Chen, Y
Fiebig, M
Mitra, NK
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1998, 41 (23) : 3961 - 3978
[5] Heat transfer enhancement of a finned oval tube with punched longitudinal vortex generators in-line
Chen, Y
Fiebig, M
Mitra, NK
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1998, 41 (24) : 4151 - 4166
[6] Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators
Chu, P.
He, Y. L.
Lei, Y. G.
Tian, L. T.
Li, R.
[J]. APPLIED THERMAL ENGINEERING, 2009, 29 (5-6) : 859 - 876
[7] WING-TYPE VORTEX GENERATORS FOR FIN-AND-TUBE HEAT-EXCHANGERS
FIEBIG, M
VALENCIA, A
MITRA, NK
[J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1993, 7 (04) : 287 - 295
[8] He Y. L., 2016, ARXIV160200323
[9] Analysis of heat transfer and pressure drop for fin-and-tube heat exchangers with rectangular winglet-type vortex generators
He, Ya-Ling
Chu, Pan
Tao, Wen-Quan
Zhang, Yu-Wen
Xie, Tao
[J]. APPLIED THERMAL ENGINEERING, 2013, 61 (02) : 770 - 783
[10] CFD analysis of fin tube heat exchanger with a pair of delta winglet vortex generators
Hwang, Seong Won
Kim, Dong Hwan
Min, June Kee
Jeong, Ji Hwan
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (09) : 2949 - 2958

← 1 2 3 →