Effects of Mo addition on microstructure of a 4th generation Ni-based single crystal superalloy

被引:15
作者
Cheng, Yuan [1 ]
Zhao, Xinbao [1 ]
Xia, Wanshun [1 ]
Pan, Qinghai [1 ]
Yue, Quanzhao [1 ]
Gu, Yuefeng [1 ]
Zhang, Ze [1 ]
机构
[1] Zhejiang Univ, Inst Superalloys Sci & Technol, Sch Mat Sci & Engn, Hangzhou 310027, Peoples R China
基金
中国国家自然科学基金;
关键词
Ni-based single crystal superalloys; Mo; Segregation ratio; Lattice misfit; STRESS-RUPTURE PROPERTIES; SOLIDIFICATION BEHAVIOR; CREEP; PHASE; RE; SEGREGATION; MOLYBDENUM; ELEMENTS; RU; TA;
D O I
10.1016/j.pnsc.2022.10.001
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effects of Mo addition on the microstructure of a 4th generation Ni-based single crystal superalloy were investigated. Mo addition significantly promoted elements Mo, W and Re partition into. phase and enhanced absolute lattice misfit at 1100 degrees C. The increase of Mo concentration from 2 wt% to 4 wt% also decreased the content of eutectic islands and the segregation ratios of other alloying elements in the as-cast state, especially Re and W. After heat treatments, the size of gamma' phase and width of. channels decreased slightly with higher Mo content. More Mo additions slightly enhanced the segregation behavior of Re while reducing the segregation behavior of Mo. However, it revealed that the primary and secondary dendrite arm spacings were barely affected by Mo addition.
引用
收藏
页码:745 / 751
页数:7
相关论文
共 50 条
[31]   Influence of Ta/Al ratio on the microstructure and creep property of a Ru-containing Ni-based single-crystal superalloy [J].
Song, Wei ;
Wang, Xinguang ;
Li, Jinguo ;
Meng, Jie ;
Yang, Yanhong ;
Liu, Jinlai ;
Liu, Jide ;
Zhou, Yizhou ;
Sun, Xiaofeng .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 89 :16-23
[32]   Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ' microstructure [J].
Coakley, James ;
Ma, Dong ;
Frost, Matthew ;
Dye, David ;
Seidman, David N. ;
Dunand, David C. ;
Stone, Howard J. .
ACTA MATERIALIA, 2017, 135 :77-87
[33]   Negative influence of rafted γ′ phases on 750 °C/750 MPa creep in a Ni-based single crystal superalloy with 4% Re addition [J].
Yang, Wenchao ;
Yue, QuanZhao ;
Cao, Kaili ;
Chen, Fangyou ;
Zhang, Jun ;
Zhang, Ruirong ;
Liu, Lin .
MATERIALS CHARACTERIZATION, 2018, 137 :127-132
[34]   Effects of Crystal Orientation and External Stress on the Static Recrystallization Behavior of an Ni-Based Single-Crystal Superalloy [J].
Xu, Fuze ;
Lin, Yongcheng ;
Ma, Dexin ;
Xiong, Wei ;
He, Daoguang ;
Liu, Guan ;
Zhao, Yunxing .
MATERIALS, 2024, 17 (13)
[35]   Microstructure evolution and dynamic recrystallization mechanism induced by grinding of Ni-based single crystal superalloy [J].
Xu, Yunchao ;
Gong, Yadong ;
Zhang, Weijian ;
Wen, Xuelong ;
Yin, Guoqiang ;
Li, Jinguo ;
Zhao, Jibin .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 310
[36]   Effect of carbon aditions on the microstructure of a single crystal Ni-based superalloy AM3 [J].
Yu Zhuhuan ;
Liu Lin ;
Zhao Xinbao ;
Zhang Weiguo ;
Zhang Jun ;
Fu Hengzhi .
CHINA FOUNDRY, 2010, 7 (04) :352-356
[37]   Effect of carbon additions on the microstructure of a single crystal Ni-based superalloy AM3 [J].
Yu Zhuhuan 1 ;
2. Materials Science and Engineering Department .
China Foundry, 2010, 7 (04) :352-356
[38]   Effect of withdrawal rate on the microstructure and static recrystallization behavior of Ni-based single crystal superalloy [J].
Xu, F. Z. ;
Xiong, W. ;
Lin, Y. C. ;
Ma, D. X. ;
Cheng, B. W. ;
Xie, G. ;
He, D. G. ;
Zhao, Y. X. ;
Li, L. ;
Deng, Y. P. .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 :8252-8264
[39]   EFFECTS OF Ru AND Cr ON γ/γ′ MICROSTRUCTURAL EVOLUTION OF Ni-BASED SINGLE CRYSTAL SUPERALLOYS DURING HEAT TREATMENT [J].
Chen Jingyang ;
Zhao Bin ;
Feng Qiang ;
Cao Lamei ;
Sun Zuqing .
ACTA METALLURGICA SINICA, 2010, 46 (08) :897-906
[40]   Influence of Mo and Ru additions on the creep behavior of Ni-based single crystal superalloys at 1100 °C [J].
Shi, Qianying ;
Huo, Jiajie ;
Zheng, Yunrong ;
Feng, Qiang .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 725 :148-159