Manganese oxyiodide thin film electrodes prepared by pulsed laser reactive deposition

被引:3
|
作者
Zhang, W [1 ]
Fu, ZW [1 ]
Qin, QZ [1 ]
机构
[1] Fudan Univ, Dept Chem, Laser Chem Inst, Shanghai 200433, Peoples R China
关键词
D O I
10.1149/1.1373376
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Manganese oxyiodide thin films as a cathode material were prepared by pulsed laser reactive deposition in an oxygen ambient. An oxyiodide film electrode with good electrochemical properties was prepared at the substrate temperature Ts = 200 degreesC and 200 mTorr oxygen ambient using a target with a NaI/Li2MnO3 molar ratio of 0.15. This film electrode exhibited a specific capacity of 240 mAh/g in the range 4.5-1.5 V and the capacity fade was less than 10% after 40 cycles. In addition, the diffusion of lithium ion into the manganese oxyiodide film was measured using the ac impedance method, and the chemical diffusion coefficient for the film was estimated to be of the order of 10(-9) to 10(-10) cm(2) s(-1). (C) 2001 The Electrochemical Society.
引用
收藏
页码:A93 / A96
页数:4
相关论文
共 50 条
  • [1] Manganese oxide thin films prepared by pulsed laser deposition for thin film microbatteries
    Xia, Hui
    Wan, Yunhai
    Yan, Feng
    Lu, Li
    MATERIALS CHEMISTRY AND PHYSICS, 2014, 143 (02) : 720 - 727
  • [2] Thin film microbatteries prepared by pulsed laser deposition
    Xia, Hui
    Tang, S. B.
    Lu, Li
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2007, 51 (03) : 1055 - 1062
  • [3] Investigation the CuS thin film prepared by pulsed laser deposition
    Najm, Isaac Saadon
    Kadhim, Suad Mahmood
    Alwahib, Ali Abdulkhaleq
    MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 2609 - 2615
  • [4] Tin-based composite oxide thin-film electrodes prepared by pulsed laser deposition
    Ding, F
    Fu, ZW
    Zhou, MF
    Qin, QZ
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (10) : 3554 - 3559
  • [5] LiNbO3 thin film prepared by pulsed laser deposition
    Kakehi, Yoshiharu
    Okamoto, Akio
    Sakurai, Yoshiaki
    Nishikawa, Yoshito
    Ogawa, Souichi
    Yotsuya, Tsutom
    Shinku/Journal of the Vacuum Society of Japan, 1999, 42 (03): : 261 - 264
  • [6] Optical response of LaCaMnO thin film prepared by pulsed laser deposition
    Yotsuya, T
    Kusaka, T
    Kakehi, Y
    Ogawa, S
    MATERIALS CHEMISTRY AND PHYSICS, 1998, 54 (1-3) : 169 - 172
  • [7] Investigation of thin film sensor prepared by pulsed laser deposition technique
    Men, Hong
    Zou, Shao-Fang
    Wang, Ping
    Legin, Andrey
    Shen, Jing-Qin
    Xu, Zhu-An
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2005, 39 (04): : 600 - 604
  • [8] Manganese oxide nanofoam prepared by pulsed laser deposition for high performance supercapacitor electrodes
    Lacerda, J. N.
    Franceschini, D. F.
    Ponzio, E. A.
    Esteves, Laura M.
    Guimaraes, R. B.
    Xing, Y. T.
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 242
  • [9] Electrochemical studies of nanoncrystalline Mg2Si thin film electrodes prepared by pulsed laser deposition
    Song, SW
    Striebel, KA
    Reade, RP
    Roberts, GA
    Cairns, EJ
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2003, 150 (01) : A121 - A127
  • [10] Tuning the Surface Electrochemistry by Strained Epitaxial Pt Thin Film Model Electrodes Prepared by Pulsed Laser Deposition
    Temmel, Sandra E.
    Fabbri, Emiliana
    Pergolesi, Daniele
    Lippert, Thomas
    Schmidt, Thomas J.
    ADVANCED MATERIALS INTERFACES, 2016, 3 (16):