Influence of Secondary Reinforcement on Behaviour of Corbels with Various Types of High-Performance Fiber-Reinforced Cementitious Composites

被引：15

作者：

Zin, Nasuha Md ^{[1
]}

Al-Fakih, Amin ^{[1
]}

Nikbakht, Ehsan ^{[1
]}

Teo, Wee ^{[2
]}

Gad, Mahmoud Anwar ^{[3
]}

机构：

[1] Univ Teknol Petronas, Civil & Environm Engn Dept, Bandar Seri Iskandar 32610, Malaysia

[2] Heriot Watt Univ Malaysia, Infrastruct & Soc EGIS, Putrajaya 62200, Malaysia

[3] Al Azhar Univ Cairo, Civil Engn Dept, Cairo 11751, Egypt

来源：

MATERIALS | 2019年 / 12卷 / 24期

关键词：

corbel; ECC; hybrid fiber-reinforced concrete (HyFRC); steel fibers; PVA fibers; primary reinforcement; secondary reinforcement; HIGH-STRENGTH CONCRETE; STEEL FIBERS; MODEL; DUCTILITY; STRUT;

D O I：

10.3390/ma12244159

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

An experimental study is conducted to determine the influence of secondary reinforcement on the behaviour of corbels fabricated with three different types of high-performance fiber-reinforced cementitious composites, including engineered cementitious concrete (ECC); high-performance steel fiber-reinforced composite (HPSFRC); and hybrid fiber-reinforced composite (HyFRC). Two shear span-to-depth ratios (a/d = 0.75 and 1.0) are explored. The mechanical properties of the composites in terms of tensile, compressive, and flexural strengths are investigated. Next, the structural behaviour of the high-performance cementitious composite corbels in terms of ultimate load capacity, ductility, and failure modes under the three-point bending test are investigated. The secondary reinforcement is proven to significantly affect stiffness and ultimately load capacity of all three high-performance composite corbels with an aspect ratio of 0.75. However, the secondary reinforcement was more impactful for the HPSFRC corbels, with 51% increase of ultimate strength. Moreover, in terms of damage, fewer cracks occurred in ECC corbels. HPSFRC corbels displayed the highest level of ductility and deformation capacity compared to the other specimens. The results were comparatively analyzed against the predicted results using truss and plastic truss models which provided relatively reliable shear strength.

引用

页数：17

共 31 条

[1]

[Anonymous], 2016, C293 ASTM

[2]

[Anonymous], 2012, BASRAH J ENG SCI

[3]

[Anonymous], 2008, 318 ACI COMM

[4]

ASTM, 2004, STANDARD TEST METHOD, VC496

[5]

ASTM, 2018, C39 STANDARD TEST ME

[6] Bond behavior of steel reinforcement in high-performance fiber-reinforced cementitious composite flexural members [J].

Bandelt, Matthew J. ;

Billington, Sarah L. .

MATERIALS AND STRUCTURES, 2016, 49 (1-2) :71-86

[7] Experimental study of the behaviour of reinforced high-strength concrete short corbels [J].

Bourget, M ;

Delmas, Y ;

Toutlemonde, F .

MATERIALS AND STRUCTURES, 2001, 34 (237) :155-162

[8] Flexural response of FRC corbels [J].

Campione, Giuseppe .

CEMENT & CONCRETE COMPOSITES, 2009, 31 (03) :204-210

[9]

Carnpione G, 2007, ACI STRUCT J, V104, P570

[10]

COHN MZ, 1982, J STRUCT DIV-ASCE, V108, P2747

← 1 2 3 4 →