Thermal Residual Stresses in W Fibers/Zr-based Metallic Glass Composites by High-energy Synchrotron X-ray Diffraction

被引：14
|
作者：
Zhang, Xinqiang [1 ]
Xue, Yunfei [1 ,2 ]
Zhang, Haifeng [3 ]
Fu, Huameng [3 ]
Wang, Zhengbin [3 ]
Nie, Zhihua [1 ]
Wang, Lu [1 ,2 ]
机构：
[1] Beijing Inst Technol, Sch Mat Sci & Engn, Beijing 100081, Peoples R China
[2] Beijing Inst Technol, Sch Mat Sci & Engn, Natl Key Lab Sci & Technol Mat Shock & Impact, Beijing 100081, Peoples R China
[3] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
来源：
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2015年 / 31卷 / 02期
基金：
中国国家自然科学基金;
关键词：
Metallic glass; W fiber diameter; Thermal residual stress; High-energy X-ray diffraction (HEXRD); MATRIX COMPOSITES; MECHANICAL-PROPERTIES; DYNAMIC DEFORMATION; TUNGSTEN; BEHAVIOR;
D O I：
10.1016/j.jmst.2014.04.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Thermal residual stresses in W fibers/Zr-based metallic glass composites were measured by in situ high energy synchrotron X-ray diffraction (HEXRD). TheWfibers for the composites were 300, 500, and 700 mu m in diameter, respectively. Coaxial cylinder model (CCM) and finite element model (FEM) were employed to simulate the distribution of thermal residual stress, respectively. HEXRD results showed that the selected diameters of W fiber had little influence on the value of thermal residual stresses in the present composites. Thermal residual stresses simulated by CCM and FEM were in good agreement with HEXRD measured results. In addition, FEM results exhibited that thermal residual stress concentrated on interface between the two phases and area where the two W fibers were the closest ones to each other.
引用
收藏
页码：159 / 163
页数：5
相关论文
共 50 条
  • [31] Deformation processes of additively manufactured interstitial-strengthened high entropy alloy: In-situ high-energy synchrotron X-ray diffraction and microstructural appraisal
    Zhang, Wei
    Shen, Jiajia
    Oliveira, J. P.
    Wang, Hui
    Feng, Shaochuan
    Schell, N.
    Kooi, Bart J.
    Pei, Yutao
    ADDITIVE MANUFACTURING, 2023, 76
  • [32] Reversible deformation-induced martensitic transformation in Al0.6CoCrFeNi high-entropy alloy investigated by in situ synchrotron based high-energy X-ray diffraction
    Ma, Lili
    Wang, Lu
    Nie, Zhihua
    Wang, Fuchi
    Xue, Yunfei
    Zhou, Jinlian
    Cao, Tangqing
    Wang, Yandong
    Ren, Yang
    ACTA MATERIALIA, 2017, 128 : 12 - 21
  • [33] Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-ray diffraction study using high-energy synchrotron radiation
    Zickler, Gerald A.
    Schnitzer, Ronald
    Hochfellner, Rainer
    Lippmann, Thomas
    Zinner, Silvia
    Leitner, Harald
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (11) : 1566 - 1573
  • [34] FeCoSiBNbCu bulk metallic glass with large compressive deformability studied by time-resolved synchrotron X-ray diffraction
    Stoica, Mihai
    Scudino, Sergio
    Bednarcik, Jozef
    Kaban, Ivan
    Eckert, Juergen
    JOURNAL OF APPLIED PHYSICS, 2014, 115 (05)
  • [35] High-strength tungsten wire reinforced Zr-based bulk metallic glass matrix composites prepared by continuous infiltration process
    Zhang, B. Y.
    Chen, X. H.
    Wang, S. S.
    Lin, D. Y.
    Hui, X. D.
    MATERIALS LETTERS, 2013, 93 : 210 - 214
  • [36] Thermal Stability of Fe-Based BMGs Investigated by High-Energy X-ray Scattering
    Girman, Vladimir
    Kolesar, Vladimir
    Lisnichuk, Maksym
    Yudina, Daria
    Baldovsky, Andrej
    Sovak, Pavol
    Bednarcik, Jozef
    APPLIED PHYSICS OF CONDENSED MATTER, APCOM 2022, 2023, 2778
  • [37] High-energy synchrotron radiation X-ray diffraction measurements during in situ aging of a NiTi-15 at. % Hf high temperature shape memory alloy
    Carl, Matthew
    Smith, Jesse
    Wheeler, Robert W.
    Ren, Yang
    Van Doren, Brian
    Young, Marcus L.
    MATERIALIA, 2019, 5
  • [38] In Situ High-Energy X-Ray Diffraction Study of Load Partitioning in Nb/NiTi Nanocomposite Plate
    Yu, Cun
    Cui, Lishan
    Hao, Shijie
    Jiang, Daqiang
    Shi, Xiaobin
    Liu, Zhenyang
    Liu, Zunping
    Brown, Dennis E.
    Ren, Yang
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (07): : 3271 - 3275
  • [39] Characterisation of residual stresses and oxides in titanium, nickel, and aluminium alloy additive manufacturing powders via synchrotron X-ray diffraction
    Valentine, Max D. A.
    Dhokia, Vimal
    Flynn, Joseph
    McNair, Sophie A. M.
    Lunt, Alexander J. G.
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [40] Effect of high-energy X-ray doses on bone elastic properties and residual strains
    Singhal, A.
    Deymier-Black, Alix C.
    Almer, J. D.
    Dunand, D. C.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2011, 4 (08) : 1774 - 1786
12345