Buckling load optimization of laminated composite stepped columns

被引：8

作者：

Topal, Umut ^{[1
]}

机构：

[1] Karadeniz Tech Univ, Fac Technol, Dept Civil Engn, TR-61830 Trabzon, Turkey

来源：

STRUCTURAL ENGINEERING AND MECHANICS | 2017年 / 62卷 / 01期

关键词：

laminated stepped columns; critical buckling load; modified feasible direction method; optimization; OPTIMAL-DESIGN; PLATES; SUBJECT;

D O I：

10.12989/sem.2017.62.1.107

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper deals with critical buckling load optimization of symmetric angle-ply laminated stepped flat columns under axial compression load. The design objective is the maximization of the critical buckling load and the design variable is the fiber orientations in the layers of the laminates. The classical laminate plate theory is used for the finite element solution of the laminated stepped flat columns. The modified feasible direction (MFD) method is used for the optimization routine. For this purpose, a program based on FORTRAN is exploited. Finally, the optimization results are presented for width ratios (b/B), ratios of fillet radius (r1/r2), aspect ratios (L/B) and boundary conditions. The results are presented in graphical and tabular forms and the results are compared.

引用

页码：107 / 111

页数：5

共 18 条

[11]

Lellep J., 2008, P 20 EURO MIN C CONT

[12] Buckling sensitivity analysis and optimal design of thin laminated structures [J].

Mateus, HC ;

Soares, CMM ;

Soares, CAM .

COMPUTERS & STRUCTURES, 1997, 64 (1-4) :461-472

[13]

Sebaey T. A., 2013, COMPOS STRUCT, V94, P31

[14] Design of variable-stiffness composite panels for maximum buckling load [J].

Setoodeh, Shahriar ;

Abdalla, Mostafa M. ;

IJsselmuiden, Samuel T. ;

Gurdal, Zafer .

COMPOSITE STRUCTURES, 2009, 87 (01) :109-117

[15] A methodology for optimally designing fibre-reinforced laminated structures with design variable tolerances for maximum buckling strength [J].

Walker, M ;

Hamilton, R .

THIN-WALLED STRUCTURES, 2005, 43 (01) :161-174

[16] The effect of stiffeners on the optimal ply orientation. and buckling load of rectangular laminated plates [J].

Walker, M .

COMPUTERS & STRUCTURES, 2002, 80 (27-30) :2229-2239

[17] Optimal design of symmetric angle-ply laminates subject to nonuniform buckling loads and in-plane restraints [J].

Walker, M ;

Adali, S ;

Verijenko, VE .

THIN-WALLED STRUCTURES, 1996, 26 (01) :45-60

[18] Multiobjective design of laminated plates for maximum stability using the finite element method [J].

Walker, M .

COMPOSITE STRUCTURES, 2001, 54 (2-3) :389-393

← 1 2 →