APPLICATION OF THE FINITE ELEMENT METHOD IN THE MILLING PROCESS STABILITY DIAGNOSIS

被引：7

作者：

Dunaj, Pawel ^{[1
]}

Marchelek, Krzysztof ^{[1
]}

Chodzko, Marcin ^{[1
]}

机构：

[1] West Pomeranian Univ Technol, Inst Mfg Engn, Szczecin, Poland

来源：

JOURNAL OF THEORETICAL AND APPLIED MECHANICS | 2019年 / 57卷 / 02期

关键词：

chatter; finite element modelling; modal analysis; machine tool; CHATTER DETECTION; REGENERATIVE CHATTER; FRICTIONAL CHATTER; IDENTIFICATION; SIMULATION; SUPPRESSION; PREDICTION; WAVELET; DESIGN; SYSTEM;

D O I：

10.15632/jtam-pl/104589

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The article presents results of both experimental and FEM model-based investigations on chatter phenomena that occur in the end milling process. On the basis of chatter symptoms observed during machining, the mechanism of its occurrence has been identified. Then, a FEM model has been built to indicate machine tool elements responsible for loss of stability. Afterwards, experimental modal analysis has been conducted in order to validate the FEM model. Finally, on the basis of the validated model, the structural changes have been proposed and applied in the real object resulting in increased stability.

引用

页码：353 / 367

页数：15

共 50 条

[41] Least squares approximated stability boundaries of milling process
Ozoegwu, C. G.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2014, 79 : 24 - 30
[42] The Influence of Process Machine Interactions on the Stability of Parallel Milling
Brecher, Christian
Trofimov, Yuri
MODELLING OF MACHINING OPERATIONS, 2011, 223 : 642 - 651
[43] Stability analysis of the milling process of the thin floor structures
Dang, Xue-Bin
Wan, Min
Zhang, Wei-Hong
Yang, Yun
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2022, 165
[44] Parametric Study of Hot Rolling Process by the Finite Element Method
Shahani, A. R.
Nodamaie, S. A.
Salehinia, I.
SCIENTIA IRANICA TRANSACTION B-MECHANICAL ENGINEERING, 2009, 16 (02): : 130 - 139
[45] Validation of a Finite Element Modeling Process for Auxetic Structures under Impact
Shepherd, Todd
Winwood, Keith
Venkatraman, Prabhuraj
Alderson, Andrew
Allen, Thomas
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2020, 257 (10):
[46] End milling finite element method for cutting force prediction and material removal analysis
Suraidah, S.
Ridzuwan, Muhamad
Asmelash, Mebrahitom
Azhar, Azmir
Mulubrhan, Freselam
5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH 2019 (ICMER 2019), 2020, 788
[47] Dynamic Analysis of Cold-Rolling Process Using the Finite-Element Method
Kapil, Sajan
Eberhard, Peter
Dwivedy, Santosha K.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (04):
[48] Stability analysis for milling operations using an Adams-Simpson-based method
Qin, Chengjin
Tao, Jianfeng
Liu, Chengliang
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (1-4) : 969 - 979
[49] Application of finite-element method in simulation of electromagnetic field
Qin Dechun
Mang Pengjun
Chen Lei
ISTM/2007: 7TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-7, CONFERENCE PROCEEDINGS, 2007, : 925 - 927
[50] Application of inverse finite element method in tube hydroforming modeling
Einolghozati, Mona
Shirin, Mehdi Bostan
Assempour, Ahmad
APPLIED MATHEMATICAL MODELLING, 2013, 37 (08) : 5913 - 5926

← 1 2 3 4 5 →