APPLICATION OF THE FINITE ELEMENT METHOD IN THE MILLING PROCESS STABILITY DIAGNOSIS

被引：7

作者：

Dunaj, Pawel ^{[1
]}

Marchelek, Krzysztof ^{[1
]}

Chodzko, Marcin ^{[1
]}

机构：

[1] West Pomeranian Univ Technol, Inst Mfg Engn, Szczecin, Poland

来源：

JOURNAL OF THEORETICAL AND APPLIED MECHANICS | 2019年 / 57卷 / 02期

关键词：

chatter; finite element modelling; modal analysis; machine tool; CHATTER DETECTION; REGENERATIVE CHATTER; FRICTIONAL CHATTER; IDENTIFICATION; SIMULATION; SUPPRESSION; PREDICTION; WAVELET; DESIGN; SYSTEM;

D O I：

10.15632/jtam-pl/104589

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The article presents results of both experimental and FEM model-based investigations on chatter phenomena that occur in the end milling process. On the basis of chatter symptoms observed during machining, the mechanism of its occurrence has been identified. Then, a FEM model has been built to indicate machine tool elements responsible for loss of stability. Afterwards, experimental modal analysis has been conducted in order to validate the FEM model. Finally, on the basis of the validated model, the structural changes have been proposed and applied in the real object resulting in increased stability.

引用

页码：353 / 367

页数：15

共 50 条

[21] Is process damping effective in the stability of robotic milling?
Tunc, Lutfi Taner
Kurnaz, Sinem
JOURNAL OF MANUFACTURING PROCESSES, 2025, 133 : 879 - 890
[22] Stability Analysis of Milling Process with Multiple Delays
Mei, Yonggang
Mo, Rong
Sun, Huibin
He, Bingbing
Bu, Kun
APPLIED SCIENCES-BASEL, 2020, 10 (10):
[23] 3D finite element modeling of face milling of continuous chip material
Pittala, Gaetano Massimo
Monno, Michele
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 47 (5-8) : 543 - 555
[24] Gaussian process emulators for the stochastic finite element method
DiazDelaO, F. A.
Adhikari, S.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2011, 87 (06) : 521 - 540
[25] Analysis of effort by the finite element method in the design process
Figueroa, R.
Mueller-Karger, C. M.
IV LATIN AMERICAN CONGRESS ON BIOMEDICAL ENGINEERING 2007, BIOENGINEERING SOLUTIONS FOR LATIN AMERICA HEALTH, VOLS 1 AND 2, 2008, 18 (1,2): : 732 - 735
[26] Modeling the powder compaction process using the finite element method and inverse optimization
Hrairi, Meftah
Chtourou, Hedi
Gakwaya, Augustin
Guillot, Michel
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 56 (5-8) : 631 - 647
[27] Finite element method numerical simulation of the carburizing process
Li, Huiping
Zhao, Guoqun
He, Lianfang
Journal of ASTM International, 2009, 6 (05):
[28] Linear improvement of the machining stability lobes and application in milling process prediction
Geng, Z.
Ridgway, K.
Turner, S.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (03) : 369 - 378
[29] Analyzing the Dynamic Characteristics of Milling Tool Using Finite Element Method and Receptance Coupling Method
Hung, Jui-Pin
Lin, Wei-Zhu
Wu, Kung-Da
Shih, Wei-Cheng
ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2019, 9 (02) : 3918 - 3923
[30] Modal analysis and application based on finite element method
Wu Shuqian
Wu Guoqing
Zhou Jingling
Zhu Weinan
FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING II, PTS 1 AND 2, 2014, 457-458 : 1601 - 1604

← 1 2 3 4 5 →