Thermal residual stresses in silicon thin film solar cells under operational cyclic thermal loading: A finite element analysis

被引:17
作者
Namvar, A. [1 ]
Dehghany, M. [1 ]
Sohrabpour, S. [1 ]
Naghdabadi, R. [1 ,2 ]
机构
[1] Sharif Univ Technol, Dept Mech Engn, Tehran 111559567, Iran
[2] Sharif Univ Technol, Inst Nanosci & Technol, Tehran 111559567, Iran
关键词
Amorphous silicon; Thin film solar cell; Thermal residual stress; Finite element analysis; Cyclic thermal stresses; AMORPHOUS-SILICON; SI; TEMPERATURE; PERFORMANCE; TRANSISTORS; SIMULATION; SUBSTRATE;
D O I
10.1016/j.solener.2016.05.058
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In manufacturing amorphous silicon solar cells, thin films are deposited at high temperatures (200400 degrees C) on a thick substrate using sputtering and plasma enhanced chemical vapor deposition (PECVD) methods. Since the thin films and substrate have different thermal expansion coefficients, cooling the system from deposition temperature to room temperature induces thermal residual stresses in both the films and substrate. In addition, these stresses, especially those having been induced in the amorphous silicon layer can change the carrier mobility and band gap energy of the silicon and consequently affect the solar cell efficiency. In this paper, a 2D finite element model is proposed to calculate these thermal residual stresses. The model is verified by the available analytical results in the literature. Then using the model, the thermal residual stresses are studied in a commercial amorphous silicon thin film solar cell for different deposition temperatures, and subsequently, the simulation results are validated with experimental results. It is shown that for the deposition temperatures of 200 and 300 degrees C, the biaxial thermal stress reaches the values of -367 and -578 MPa, respectively, in the amorphous silicon layer. Finally, the model is utilized to study the cyclic thermal stresses arising in the solar cell installed in Tehran as a sample city during its operational time due to the ambient temperature changes and photovoltaic process. The results are reported for different months based on the minimum and maximum temperatures published during a year. It is demonstrated that the temperature changes can induce mean stress with stress amplitude of -526 and 60 MPa, respectively, in the amorphous silicon layer during June, for example. The calculated loading history can be used by the manufactures in thermal fatigue life assessment of the solar cell. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:366 / 373
页数:8
相关论文
共 50 条
  • [41] Finite element analysis of thermal stresses in high-power substrates for hybrid circuits
    Manning, AS
    Fuchs, S
    MATERIALS & DESIGN, 1997, 18 (02): : 61 - 72
  • [42] Residual Stress Analysis of an Orthotropic Composite Cylinder under Thermal Loading and Unloading
    Zarandi, Somayeh Bagherinejad
    Lai, Hsiang-Wei
    Wang, Yun-Che
    Aizikovich, Sergey
    SYMMETRY-BASEL, 2019, 11 (03):
  • [43] Finite element simulations of thermal residual stresses in realistic 3D WC-Co microstructures
    Ohman, Ikael
    Ekh, Magnus
    Larsson, Fredrik
    Wahnstrom, Goran
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 85
  • [44] Analysis of Temperature in Solar Thermal By 3-D Finite Element Method
    Amornsawatwattana, Issaraporn
    Pao-la-or, Padej
    2017 INTERNATIONAL ELECTRICAL ENGINEERING CONGRESS (IEECON), 2017,
  • [45] FINITE ELEMENT ANALYSIS OF A PARTITIONED CAVITY UNDER MIXED THERMAL CONDITIONS
    Ghosh, P. K.
    Sarkar, A.
    Sastri, V. M. K.
    INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 1992, 2 (01) : 271 - 279
  • [46] Investigation of thermal residual stresses in layered composite using the finite element method and X-ray diffraction
    S. Ho
    E. J. Lavernia
    Metallurgical and Materials Transactions B, 1997, 28 : 969 - 978
  • [47] Detailed modeling and numerical analysis of thermo mechanical stresses in the crystalline silicon and thin film PV modules under varying climatic conditions
    Limane, Badreddine
    Ould-Lahoucine, Cherif
    Guenfoud, Salah
    Diaf, Said
    Laefer, Debra F.
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2024, 52
  • [48] Analysis of Thermal Stress in Vanadium Dioxide Thin Films by Finite Element Method
    Wang, Yuemin
    Wang, Lebin
    Gu, Jinxin
    Yan, Xiangqiao
    Lu, Jiarui
    Dou, Shuliang
    Li, Yao
    Wang, Lei
    NANOMATERIALS, 2022, 12 (23)
  • [49] Resistivity analysis on the enhancement of silicon heterojunction solar cells in light-thermal treatment
    Zeng, Qingguo
    Li, Longwei
    Li, Zhiwei
    Meng, Hongchen
    Wu, Xiaoyuan
    Zhong, Guanfa
    Zhou, Lang
    Wei, Xiuqin
    OPTICAL MATERIALS, 2024, 157
  • [50] Finite element analysis on failure-yielding stresses in the wheel bolt of automobile vehicle due to operational loading conditions
    Bogale, Dilinesaw
    Getachew, Zerihun
    Zeleke, Zablon
    Tamiru, Tesfaye
    MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2024, 7 (02) : 1311 - 1325