Abrasive wear effect of sugarcane juice on sugarcane rolls

被引：6

作者：

Victoria Prado, Renzo ^{[2
]}

Uquillas, Beatriz ^{[2
]}

Aguilar, Jose Y. ^{[2
]}

Aguilar, Yesid ^{[2
]}

Casanova, Fernando ^{[1
]}

机构：

[1] Univ Valle, Escuela Ingn Mecan, Sch Mech Engn, Cali, Colombia

[2] Univ Valle, Sch Mat Engn, Cali, Colombia

来源：

WEAR | 2010年 / 270卷 / 1-2期

关键词：

Abrasion; Corrosion; Wear mechanisms; Sugarcane rolls; CORROSION; STEEL;

D O I：

10.1016/j.wear.2010.09.011

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Corrosion seems to be an important factor affecting the wear of sugarcane rolls This paper shows the results of a research undertaken to evaluate the corrosive effect of sugarcane juice on carbon steel rolls Laboratory tests were performed on a prototype that approximately reproduces the wear conditions of sugarcane rolls Laboratory tests were performed on low carbon steel (ASTM-A36) with and without a layer of welded stainless steel The performance of a buffer of austenitic stainless steel was quantitatively evaluated in a field test using a real roll Field tests showed no improvement in the performance of the roll when welded with stainless steel In laboratory tests synergy between corrosion and abrasion was found in carbon steel No direct comparison between the wear results on carbon and stainless steel could be done because of the big difference in topography of the specimens in addition to the load applied during the tests Similar abrasion mechanisms were found in carbon steel and welded stainless steel (C) 2010 Elsevier B V All rights reserved

引用

页码：83 / 87

页数：5

共 11 条

[1]

Barba C, 2002, SINTESIS CARBOXIMETI, P12

[2] PREDICTING SYNERGISM BETWEEN CORROSION AND ABRASIVE WEAR [J].

BATCHELOR, AW ;

STACHOWIAK, GW .

WEAR, 1988, 123 (03) :281-291

[3] Wear and corrosion wear of medium carbon steel and 304 stainless steel [J].

Bateni, MR ;

Szpunar, JA ;

Wang, X ;

Li, DY .

WEAR, 2006, 260 (1-2) :116-122

[4] Microstructure and abrasive wear behaviour of shielded metal arc welding hardfacings used in the sugarcane industry [J].

Buchanan, V. E. ;

Shipway, P. H. ;

McCartney, D. G. .

WEAR, 2007, 263 :99-110

[5] A study on the wear of sugar cane rolls [J].

Casanova, Fernando ;

Aguilar, Yesid .

WEAR, 2008, 265 (1-2) :236-243

[6]

Downing C. M., 1999, Proceedings of the 1999 Conference of the Australian Society of Sugar Cane Technologists, Townsville, Queensland, Australia, 27-30 April 1999., P294

[7] Biocorrosion of stainless steel grade 304L (SS304L) in sugar cane juice [J].

Durmoo, S. ;

Richard, C. ;

Beranger, G. ;

Moutia, Y. .

ELECTROCHIMICA ACTA, 2008, 54 (01) :74-79

[8] Physical and mechanical properties of microcrystalline cellulose prepared from agricultural residues [J].

El-Sakhawy, Mohamed ;

Hassan, Mohammad L. .

CARBOHYDRATE POLYMERS, 2007, 67 (01) :1-10

[9]

Kroes S., 1999, Proceedings of the 1999 Conference of the Australian Society of Sugar Cane Technologists, Townsville, Queensland, Australia, 27-30 April 1999., P307

[10]

Plaza F., 2001, Proceedings of the 2001 Conference of the Australian Society of Sugar Cane Technologists held at Mackay, Queensland, Australia, 1st-4th May 2001, P428

← 1 2 →