Mechanical properties of recycled carbon fibre/polyester thermoplastic tape composites

被引：17
|
作者：
Akonda, M. H. [1 ]
Stefanova, M. [2 ]
Potluri, P. [2 ]
Shah, D. U. [3 ]
机构：
[1] Tilsatec Adv Mat, Wakefield, England
[2] Univ Manchester, Sch Mat, Manchester, Lancs, England
[3] Univ Cambridge, Dept Architecture, Ctr Nat Mat Innovat, Cambridge, England
来源：
JOURNAL OF COMPOSITE MATERIALS | 2017年 / 51卷 / 18期
基金：
英国工程与自然科学研究理事会;
关键词：
Tape; thermoplastic resin; delamination; mechanical testing; prepreg; TECHNOLOGIES;
D O I：
10.1177/0021998316672091
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The increasing use of high-value carbon fibre in composites is linked with increasing waste generation: from dry fibre and prepreg offcuts during manufacturing to end-of-life parts. In this work, a novel thermoplastic tape was produced from 60wt.% manufacturing waste carbon fibres (60mm long) and 40wt.% polyester fibres using a thermal consolidation technique. The thin (0.2mm) and narrow (20mm wide) tapes were then used to fabricate laminated composite panels in two 0/90 tape architectures: cross-ply and woven ply. Various mechanical properties, including tensile, flexural, compression and impact were evaluated. It was found that cross-ply performed better than woven ply laminates, with failure in the latter materials typically initiating at the tape interlacement points.
引用
收藏
页码：2655 / 2663
页数：9
相关论文
共 50 条
  • [31] Improving the mechanical properties of glass-fibre-reinforced polyester composites by modification of fibre surface
    Varga, Cs.
    Miskolczi, N.
    Bartha, L.
    Lipoczi, G.
    MATERIALS & DESIGN, 2010, 31 (01) : 185 - 193
  • [32] MECHANICAL PROPERTIES OF TAPE COMPOSITES
    CHEN, PE
    NIELSEN, LE
    KOLLOID-ZEITSCHRIFT AND ZEITSCHRIFT FUR POLYMERE, 1969, 235 (01): : 1174 - +
  • [33] Mechanical properties and failure mechanisms of carbon fibre reinforced thermoplastic laminates
    Kyoto Inst of Technology, Kyoto, Japan
    Compos Part A Appl Sci Manuf, 9-10 (823-832):
  • [34] Mechanical properties and failure mechanisms of carbon fibre reinforced thermoplastic laminates
    Oya, N
    Hamada, H
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (9-10) : 823 - 832
  • [35] DETERMINATION OF MECHANICAL PROPERTIES OF ADDITIVE MANUFACTURED CONTINUOUS FIBRE REINFORCED THERMOPLASTIC COMPOSITES
    Sedlacek, Frantisek
    Raz, Karel
    Chval, Zdenek
    7TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE (IRF2020), 2020, : 31 - 32
  • [36] Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites
    Sapuan, S. M.
    Pua, Fei-ling
    El-Shekeil, Y. A.
    AL-Oqla, Faris M.
    MATERIALS & DESIGN, 2013, 50 : 467 - 470
  • [37] Mechanical properties of randomly oriented short Sansevieria cylindrica fibre/polyester composites
    Sreenivasan, V. S.
    Ravindran, D.
    Manikandan, V.
    Narayanasamy, R.
    MATERIALS & DESIGN, 2011, 32 (04) : 2444 - 2455
  • [38] Influence of alkali treatment on the mechanical properties of new cane fibre/polyester composites
    Chikouche, M. Dj Ladghem
    Merrouche, A.
    Azizi, A.
    Rokbi, M.
    Walter, S.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2015, 34 (16) : 1329 - 1339
  • [39] Mechanical properties of kenaf bast and core fibre reinforced unsaturated polyester composites
    Ishak, M. R.
    Leman, Z.
    Sapuan, S. M.
    Edeerozey, A. M. M.
    Othman, I. S.
    9TH NATIONAL SYMPOSIUM ON POLYMERIC MATERIALS (NSPM 2009), 2010, 11
  • [40] Mechanical properties of Cissus quadrangularis stem fibre reinforced isophthalic polyester composites
    Veeranna M.
    Arunkumar D.T.
    Vinod
    Pattanaik A.
    Rao P.S.R.
    Sreenivasulu G.
    International Journal of Materials and Product Technology, 2021, 62 (1-3): : 96 - 110
12345