Mechanical properties of recycled carbon fibre/polyester thermoplastic tape composites

被引：17
|
作者：
Akonda, M. H. [1 ]
Stefanova, M. [2 ]
Potluri, P. [2 ]
Shah, D. U. [3 ]
机构：
[1] Tilsatec Adv Mat, Wakefield, England
[2] Univ Manchester, Sch Mat, Manchester, Lancs, England
[3] Univ Cambridge, Dept Architecture, Ctr Nat Mat Innovat, Cambridge, England
来源：
JOURNAL OF COMPOSITE MATERIALS | 2017年 / 51卷 / 18期
基金：
英国工程与自然科学研究理事会;
关键词：
Tape; thermoplastic resin; delamination; mechanical testing; prepreg; TECHNOLOGIES;
D O I：
10.1177/0021998316672091
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The increasing use of high-value carbon fibre in composites is linked with increasing waste generation: from dry fibre and prepreg offcuts during manufacturing to end-of-life parts. In this work, a novel thermoplastic tape was produced from 60wt.% manufacturing waste carbon fibres (60mm long) and 40wt.% polyester fibres using a thermal consolidation technique. The thin (0.2mm) and narrow (20mm wide) tapes were then used to fabricate laminated composite panels in two 0/90 tape architectures: cross-ply and woven ply. Various mechanical properties, including tensile, flexural, compression and impact were evaluated. It was found that cross-ply performed better than woven ply laminates, with failure in the latter materials typically initiating at the tape interlacement points.
引用
收藏
页码：2655 / 2663
页数：9
相关论文
共 50 条
  • [1] RECYCLED GLASS FIBRE/POLYESTER COMPOSITES - PROCESSING AND MECHANICAL CHARACTERIZATION
    Prabhakaran, R. T. Durai
    Thomason, James
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [2] Recycled carbon fibre-reinforced polypropylene thermoplastic composites
    Akonda, M. H.
    Lawrence, C. A.
    Weager, B. M.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (01) : 79 - 86
  • [3] Electrically conductive recycled carbon fibre-reinforced thermoplastic composites
    Akonda, Mahmudul H.
    Lawrence, Carl A.
    EL-Dessouky, Hassan M.
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2015, 28 (11) : 1550 - 1563
  • [4] Mechanical properties of Napier grass fibre/polyester composites
    Haameem, M. J. A.
    Majid, M. S. Abdul
    Afendi, M.
    Marzuki, H. F. A.
    Fahmi, I.
    Gibson, A. G.
    COMPOSITE STRUCTURES, 2016, 136 : 1 - 10
  • [5] Mechanical and viscoelastic properties of butadiene-styrene thermoplastic and oxidized carbon fibre composites
    Ibarra, L
    Macias, A
    Palma, E
    POLYMER INTERNATIONAL, 1996, 40 (03) : 169 - 178
  • [6] Influence of recycled carbon fibre yarn structures on the mechanical properties of unidirectional thermoset composites
    Hasan, Mir Mohammad Badrul
    Overberg, Matthias
    Abdkader, Anwar
    Cherif, Chokri
    JOURNAL OF COMPOSITE MATERIALS, 2025,
  • [7] Mechanical Properties of Recycled Kraft Paper Residue Polyester Composites
    Laredo dos Reis, Joao Marciano
    Cardoso, Jose Luiz
    Ferreira e Castro, Protasio
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2014, 17 (04): : 888 - 892
  • [8] Microstructure and mechanical properties of short carbon fibre/SiC multilayer composites prepared by tape casting
    Yang, W. S.
    Biamino, S.
    Padovano, E.
    Fuso, L.
    Pavese, M.
    Marchisio, S.
    Vasquez, D.
    Bolivar, C. Vega
    Fino, P.
    Badini, C.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2012, 72 (06) : 675 - 680
  • [9] Characterisation of tape-based carbon fibre thermoplastic discontinuous composites for energy absorption
    Francis, Sachin
    Bru, Thomas
    Asp, Leif E.
    Wysocki, Maciej
    Cameron, Christopher
    PLASTICS RUBBER AND COMPOSITES, 2021, 50 (07) : 351 - 361
  • [10] Mechanical properties of thermoplastic butadiene-styrene (SBS) and oxidized short carbon fibre composites
    Ibarra, L
    Panos, D
    POLYMER INTERNATIONAL, 1997, 43 (03) : 251 - 259
12345