Mechanical properties of Al2O3-doped (2 wt.%) ZnO films

被引：11

作者：

Kuriki, Shina ^{[1
]}

Kawashima, Toshitaka ^{[1
]}

机构：

[1] Sony Corp, Core Component Business Unit, Core Technol Dev Grp, Shinagawa Ku, Tokyo 1410001, Japan

来源：

THIN SOLID FILMS | 2007年 / 515卷 / 24期

关键词：

transparent conductive oxide; ZnO : Al; mechanical properties; nano indentation; adhesion;

D O I：

10.1016/j.tsf.2007.04.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

We report a new method of evaluating the adhesion of Al2O3-doped (2 wt.%) ZnO (AZO) thin films. The AZO films were deposited by DC reactive magnetron sputtering on plastic film (PET: polyethylencterephthalatc) at various sputtering pressures, power, and reactive gas-flow ratios. The adhesion test of the films was carried out using the nanoindentation system. The fracture point as determined by the load-displacement curve occurred at the time of separation between the thin film and the substrate. The integration value of load and displacement to the fracture point is defined as the degree of adhesion (S-w). The AZO films showed that adhesion increase as sputtering power increases and sputtering pressure decreases. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：8594 / 8597

页数：4

共 50 条

[21] Tribological Behavior of Plasma-Sprayed Al2O3-20 wt.%TiO2 Coating
Cui, Shiyu
Miao, Qiang
Liang, Wenping
Zhang, Zhigang
Xu, Yi
Ren, Beilei
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (05) : 2086 - 2094
[22] THE EFFECT OF SEALING PROCESSES ON THE CORROSION BEHAVIOUR OF Al2O3-13 wt. % TiO2 COATING
Shao Jia
Wang Zehua
Si Liqiong
Zhou Zehua
Zhang Xin
Jiang Shaoqun
Wang Gang
CERAMICS-SILIKATY, 2019, 63 (02) : 185 - 193
[23] Microstructure and Properties of Cu-0.4 wt.% Al2O3 Composites Fabricated by Hot Extrusion and Cold Drawing
Feng, Xiaowei
Zhang, Dongping
Feng, Bo
Lin, Yingfei
Wang, Juan
Zheng, Kaihong
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (02) : 1241 - 1249
[24] SYNTHESIS AND EVALUATION OF COPPER STRENGTHENED WITH 3 wt.% TiC AND/OR Al2O3 PREPARED BY SPS TECHNIQUE
Hamid, Fadel S.
El-kady, Omayma A.
El-Nikhaily, A.
Elsayed, Ayman
Essa, A. R. S.
COMPOSITES-MECHANICS COMPUTATIONS APPLICATIONS, 2021, 12 (02): : 61 - 79
[25] Ti doped Cr2O3 thin films: Atomic layer deposition, mechanical and optical properties
Mehr, Mahtab Salari
Aarik, Lauri
Jogiaas, Taivo
Tarre, Aivar
Kasikov, Aarne
Roosalu, Kaspar
Mandar, Hugo
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 968
[26] Synthesis, mechanical characterization and photon radiation shielding properties of ZnO-Al2O3-Bi2O3-B2O3 glass system
Zaid, M. H. M.
Matori, K. A.
Nazrin, S. N.
Azlan, M. N.
Hisam, R.
Iskandar, S. M.
Yusof, N. N.
Hila, F. C.
Sayyed, M., I
OPTICAL MATERIALS, 2021, 122 (122)
[27] Influence of the fabrication route of tunsgen-2 wt.% vanadium in the microstructure and mechanical properties
Palacios, T.
Aguirre, M., V
Pastor, J. Y.
FUSION ENGINEERING AND DESIGN, 2018, 132 : 60 - 66
[28] Fabrication and Mechanical Properties of Al2O3/TiAl in Situ Composites Doped With Nb2O5
Wang, F.
Fan, N.
Zhu, J.
Jiang, H.
SCIENCE OF SINTERING, 2015, 47 (03) : 311 - 317
[29] Mechanical properties and microstructure of Al2O3/TiAl in situ composites doped with Cr
Xiang Liuyi
Wang Fen
Zhu Jianfeng
Wang Xiaofeng
RARE METALS, 2011, 30 : 482 - 485
[30] Mechanical properties and microstructure of Al2O3/TiAl in situ composites doped with Cr
Liuyi Xiang
Fen Wang
Jianfeng Zhu
Xiaofeng Wang
Rare Metals, 2011, 30 : 482 - 485

← 1 2 3 4 5 →