Mechanical properties of Al2O3-doped (2 wt.%) ZnO films

被引：11

作者：

Kuriki, Shina ^{[1
]}

Kawashima, Toshitaka ^{[1
]}

机构：

[1] Sony Corp, Core Component Business Unit, Core Technol Dev Grp, Shinagawa Ku, Tokyo 1410001, Japan

来源：

THIN SOLID FILMS | 2007年 / 515卷 / 24期

关键词：

transparent conductive oxide; ZnO : Al; mechanical properties; nano indentation; adhesion;

D O I：

10.1016/j.tsf.2007.04.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

We report a new method of evaluating the adhesion of Al2O3-doped (2 wt.%) ZnO (AZO) thin films. The AZO films were deposited by DC reactive magnetron sputtering on plastic film (PET: polyethylencterephthalatc) at various sputtering pressures, power, and reactive gas-flow ratios. The adhesion test of the films was carried out using the nanoindentation system. The fracture point as determined by the load-displacement curve occurred at the time of separation between the thin film and the substrate. The integration value of load and displacement to the fracture point is defined as the degree of adhesion (S-w). The AZO films showed that adhesion increase as sputtering power increases and sputtering pressure decreases. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：8594 / 8597

页数：4

共 50 条

[11] An evaluation of plasma-sprayed coatings based on Al2O3 and Al2O3-13 wt.% TiO2 with bond coat on pure titanium substrate
Yilmaz, Senol
CERAMICS INTERNATIONAL, 2009, 35 (05) : 2017 - 2022
[12] Mechanical properties of atomic layer deposited Al2O3/ZnO nanolaminates
Homola, Tomas
Bursikova, Vilma
Ivanova, Tatiana V.
Soucek, Pavel
Maydannik, Philipp S.
Cameron, David C.
Lackner, Juergen M.
SURFACE & COATINGS TECHNOLOGY, 2015, 284 : 198 - 205
[13] The Effect of Al2Cu Precipitate Size on Microstructure and Mechanical Properties of Al-2 wt.%Cu Alloys Fabricated by ARB
B. Azad
E. Borhani
Journal of Materials Engineering and Performance, 2015, 24 : 4789 - 4796
[14] The Effect of Al2Cu Precipitate Size on Microstructure and Mechanical Properties of Al-2 wt.%Cu Alloys Fabricated by ARB
Azad, B.
Borhani, E.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (12) : 4789 - 4796
[15] Mechanical behavior of 3Al2O3•2SiO2 films under nanoindentation
Botero, C. A.
Jimenez-Pique, E.
Seuba, J.
Kulkarni, T.
Sarin, V. K.
Llanes, L.
ACTA MATERIALIA, 2012, 60 (16) : 5889 - 5899
[16] Mechanical properties and microstructure of Al2O3/TiAl in situ composites doped with Cr2O3
Xiang, Liuyi
Wang, Fen
Zhu, Jianfeng
Wang, Xiaofeng
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (09): : 3337 - 3341
[17] Microstructure and mechanical properties of Al2O3/TiAl in situ composites doped with Fe2O3
Xiang, Liuyi
Wang, Fen
Zhu, Jianfeng
Wang, Xiaofeng
ADVANCED MATERIAL SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 675-677 : 597 - 600
[18] Effect of surface macroroughness on the microstructure and sliding wear properties of Al2O3+13 wt.% TiO2 thick coatings
Zesati-Belmontes, Sara I.
Lopez-Baltazar, Enrique A.
Ruiz-Mondragon, Jose J.
Ruiz-Luna, Haidee
Alvarado-Hernandez, Francisco
Baltazar-Hernandez, Victor H.
REVISTA DE METALURGIA, 2022, 58 (04)
[19] Mechanical properties and photostability of fast-growing wood deposited with nano-Al2O3/ZnO composite films
Li, Jingkui
Xu, Liying
Wang, Yanan
Xiao, Zirun
Yu, Ying
WOOD MATERIAL SCIENCE & ENGINEERING, 2024, 19 (03) : 774 - 782
[20] Microstructure and Properties of Cu-0.4 wt.% Al2O3 Composites Fabricated by Hot Extrusion and Cold Drawing
Xiaowei Feng
Dongping Zhang
Bo Feng
Yingfei Lin
Juan Wang
Kaihong Zheng
Journal of Materials Engineering and Performance, 2022, 31 : 1241 - 1249

← 1 2 3 4 5 →