A new medium for boriding of Ti6Al4V alloy for biomedical applications

被引：10

作者：

Kaplan, Yavuz ^{[1
]}

Can, Ahmet Cetin ^{[2
]}

Ulukoy, Arzum ^{[1
]}

机构：

[1] Pamukkale Univ, Fac Technol, Dept Mfg Engn, TR-20020 Denizli, Turkey

[2] Pamukkale Univ, Dept Mech Engn, Fac Engn, Denizli, Turkey

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS | 2019年 / 233卷 / 02期

关键词：

Boriding; Ti6Al4V; new boriding medium; oxidation; KFeO2; COMMERCIALLY PURE TITANIUM; GROWTH-KINETICS; SURFACE; COATINGS; TI; TI-6AL-4V; BEHAVIOR; LAYERS; AL;

D O I：

10.1177/1464420716662801

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study presents a low-cost and environmentally friendly medium for the pack boriding (boronizing) of a Ti6Al4V alloy. Titanium and its alloys are known to be highly reactive and to have extreme oxygen affinity. Therefore, boriding is performed under vacuum or in protective atmospheric conditions. This work evaluated the pack boriding heat treatments of a Ti6Al4V alloy under atmospheric conditions via the various boriding media used by previous researchers. In addition, a new pack boriding medium was developed by adding aluminum. Consequently, this study demonstrated that it is possible to obtain an undamaged titanium surface by applying solid-state boriding under atmospheric conditions.

引用

页码：109 / 119

页数：11

共 50 条

[41] Numerical simulation and experimental investigation of laser joining Ti6Al4V alloy and CFRTP with embedded Ti6Al4V alloy
Xu, Ying
Bu, Hengchang
Wang, Feiyun
Ma, Wanping
Zhan, Xiaohong
OPTICS AND LASER TECHNOLOGY, 2022, 156
[42] Numerical simulation and experimental investigation of laser joining Ti6Al4V alloy and CFRTP with embedded Ti6Al4V alloy
Xu, Ying
Bu, Hengchang
Wang, Feiyun
Ma, Wanping
Zhan, Xiaohong
OPTICS AND LASER TECHNOLOGY, 2022, 156
[43] Laser Welding of Ti6Al4V Titanium Alloy in Air and a Water Medium
Alhajhamoud, Mohamad
Ozbey, Sayit
Ilgaz, Mehmet Alp
Candan, Levent
Cinar, Ibrahim
Vukotic, Mario
Corovic, Selma
Miljavec, Damijan
Kayahan, Ersin
MATERIALS, 2022, 15 (24)
[44] Voltammetric stability of anodic films on the Ti6Al4V alloy in chloride medium
Marino, Claudia E. B.
Biaggio, Sonia R.
Rocha, Romeu C.
Bocchi, Nerilso
ELECTROCHIMICA ACTA, 2006, 51 (28) : 6580 - 6583
[45] Characterization of Ti-C-N coatings deposited on Ti6Al4V for biomedical applications
Saenz de Viteri, V.
Barandika, M. G.
Ruiz de Gopegui, U.
Bayon, R.
Zubizarreta, C.
Fernandez, X.
Igartua, A.
Agullo-Rueda, F.
JOURNAL OF INORGANIC BIOCHEMISTRY, 2012, 117 : 359 - 366
[46] In-situ formation of laser Ti6Al4V-TiB composite coatings on Ti6Al4V alloy for biomedical application
Popoola, A. P. I.
Phume, L.
Pityana, S.
Aigbodion, V. S.
SURFACE & COATINGS TECHNOLOGY, 2016, 285 : 161 - 170
[47] Improvement of mechanical, biological, and electrochemical properties of Ti6Al4V alloy modified with Nb and Ag for biomedical applications
Moayedee, Yeganeh
Nikzad, Leila
Fakhraei, Omid
Paykar, Zeynab
Zekavat, Elaheh
JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 972
[48] Electrophoretic Deposition of Thin Film TiO2 on Ti6AL4V Alloy Surface for Biomedical Applications
Hamil, Muslim Idan
Siyah, Murtdha Adhab
Khalaf, Mohammed K.
EGYPTIAN JOURNAL OF CHEMISTRY, 2020, 63 (08): : 2959 - 2964
[49] SURFACE MODIFICATION OF Ti6Al4V TITANIUM ALLOY FOR BIOMEDICAL APPLICATIONS AND ITS EFFECT ON TRIBOLOGICAL PERFORMANCE - A REVIEW
Lepicka, M.
Gradzka-Dahlke, M.
REVIEWS ON ADVANCED MATERIALS SCIENCE, 2016, 46 (01) : 86 - 103
[50] Surface modification of Ti6Al4V titanium alloy for biomedical applications and its effect on tribological performance - A review
Faculty of Mechanical Engineering, Department of Materials and Biomedical Engineering, Bialystok University of Technology, ul. Wejska 45 C, Bialystok
15-351, Poland
Rev. Adv. Mater. Sci., 1 (86-103):

← 1 2 3 4 5 →