A new medium for boriding of Ti6Al4V alloy for biomedical applications

被引：10
|
作者：
Kaplan, Yavuz [1 ]
Can, Ahmet Cetin [2 ]
Ulukoy, Arzum [1 ]
机构：
[1] Pamukkale Univ, Fac Technol, Dept Mfg Engn, TR-20020 Denizli, Turkey
[2] Pamukkale Univ, Dept Mech Engn, Fac Engn, Denizli, Turkey
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS | 2019年 / 233卷 / 02期
关键词：
Boriding; Ti6Al4V; new boriding medium; oxidation; KFeO2; COMMERCIALLY PURE TITANIUM; GROWTH-KINETICS; SURFACE; COATINGS; TI; TI-6AL-4V; BEHAVIOR; LAYERS; AL;
D O I：
10.1177/1464420716662801
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study presents a low-cost and environmentally friendly medium for the pack boriding (boronizing) of a Ti6Al4V alloy. Titanium and its alloys are known to be highly reactive and to have extreme oxygen affinity. Therefore, boriding is performed under vacuum or in protective atmospheric conditions. This work evaluated the pack boriding heat treatments of a Ti6Al4V alloy under atmospheric conditions via the various boriding media used by previous researchers. In addition, a new pack boriding medium was developed by adding aluminum. Consequently, this study demonstrated that it is possible to obtain an undamaged titanium surface by applying solid-state boriding under atmospheric conditions.
引用
收藏
页码：109 / 119
页数：11
相关论文
共 50 条
  • [1] Surface treatments for boriding of Ti6Al4V alloy in view of applications as a biomaterial
    Peretti, V
    Ferraris, S.
    Gautier, G.
    Hellmich, C.
    Lahayne, O.
    Stella, B.
    Yamaguchi, S.
    Spriano, S.
    TRIBOLOGY INTERNATIONAL, 2018, 126 : 21 - 28
  • [2] Characterization and Properties of Boriding Titanium Alloy Ti6Al4V
    Kaouka, A.
    Benarous, K.
    ACTA PHYSICA POLONICA A, 2020, 137 (04) : 493 - 495
  • [3] Surface Modification of Ti6Al4V Alloy by Pack Boriding
    Atar, Erdem
    Kayali, E. Sabri
    Cimenoglu, Huseyin
    TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2009, : 601 - +
  • [4] Effects of boriding on cavitation erosion resistance of Ti6Al4V alloy
    Shi, Ye-Ting
    Cui, Zhen-Duo
    Yuan, Xu-Bo
    Yang, Xianjin
    ENGINEERING MATERIALS VII, 2014, 573 : 61 - 67
  • [5] Numerical Modeling and Analysis of Ti6Al4V Alloy Chip for Biomedical Applications
    Saleem, Waqas
    Salah, Bashir
    Velay, Xavier
    Ahmad, Rafiq
    Khan, Razaullah
    Pruncu, Catalin I.
    MATERIALS, 2020, 13 (22) : 1 - 17
  • [6] MODIFICATION OF THE STRUCTURE AND PROPERTIES OF THE TITANIUM ALLOY TI6AL4V IN BIOMEDICAL APPLICATIONS
    Klimas, J.
    Lukaszewicz, A.
    Szota, M.
    Nabialek, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (03) : 2013 - 2018
  • [7] Surface evolution and growth kinetics of Ti6Al4V alloy in pack boriding
    Duan, Yonghua (duanyh@kmust.edu.cn), 1600, Elsevier Ltd (742):
  • [8] Surface evolution and growth kinetics of Ti6Al4V alloy in pack boriding
    Duan, Yonghua
    Li, Ping
    Chen, Zhizhong
    Shi, Jian
    Ma, Lishi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 742 : 690 - 701
  • [9] The Effect of Coatings on the Wear Behavior of Ti6Al4V Alloy Used in Biomedical Applications
    Danisman, S.
    Odabas, D.
    Teber, M.
    9TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (BALKANTRIB'17), 2018, 295
  • [10] Mechanical Properties and Microstructure of DMLS Ti6Al4V Alloy Dedicated to Biomedical Applications
    Mierzejewska, Zaneta Anna
    Hudak, Radovan
    Sidun, Jaroslaw
    MATERIALS, 2019, 12 (01)
12345