Bauxite free iron rich calcium sulfoaluminate cement: Preparation, hydration and properties

被引:35
作者
Huang, Yongbo [1 ]
Pei, Yan [2 ]
Qian, Jueshi [3 ]
Gao, Xin [1 ]
Liang, Jiao [3 ]
Duan, Guangbin [1 ]
Zhao, Piqi [1 ]
Lu, Lingchao [1 ]
Cheng, Xin [1 ]
机构
[1] Univ Jinan, Jinan 250022, Peoples R China
[2] Shandong Univ, Sch Civil Engn, Geotech & Struct Engn Res Ctr, Jinan 250061, Peoples R China
[3] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400045, Peoples R China
基金
中国博士后科学基金; 中国国家自然科学基金;
关键词
Iron rich calcium sulfoaluminate cement; Preparation; Hydration; Properties; BELITE CEMENT; PHASE; YEELIMITE; KINETICS; CLINKER;
D O I
10.1016/j.conbuildmat.2020.118774
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
For the preparation of calcium sulfoaluminate (CSA) cement without bauxite, the iron rich CSA cement was prepared by the partial substitution of Al for Fe in C(4)A(3)s. Besides, the hydration and properties of iron rich CSA cement were investigated. Raw meal proportioning shows that iron rich CSA cement clinker can be prepared without bauxite when the x value of C(4)A(3-x)F(x)s exceeds 0.7. Results demonstrate that the iron rich CSA cement clinker can be prepared at 1175-1225 degrees C with the heat preservation time of 10 min. With the rise of Fe2O3 content in the raw meal, the C(4)A(3)s content of iron rich CSA cement clinker lowers down, more C(4)AF and C2F forms, more c-C(4)A(3)s forms at the expense of o-C(4)A(3)s, and the crystal size of C(4)A(3)s becomes smaller. For the iron rich CSA cement, the setting time is prolonged and the expansion rate lowers down with the rise of Fe2O3 content. For the compressive strengths, the iron rich CSA cements are lower than that of CSA cement at early hydration age. However, the compressive strength of iron rich CSA cement exceeds that of CSA cement at 90 d. Therefore, it is available to prepare bauxite-free iron rich CSA cement with high late age strength. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页数:9
相关论文
共 38 条
  • [31] New applications of calcium sulfoaluminate cement
    Péra, J
    Ambroise, J
    [J]. CEMENT AND CONCRETE RESEARCH, 2004, 34 (04) : 671 - 676
  • [32] Performance of belite-sulfoaluminate cements
    Quillin, K
    [J]. CEMENT AND CONCRETE RESEARCH, 2001, 31 (09) : 1341 - 1349
  • [33] Recycling of Al-rich industrial sludge in refractory ceramic pressed bodies
    Ribeiro, MJ
    Tulyaganov, DU
    Ferreira, JM
    Labrincha, JA
    [J]. CERAMICS INTERNATIONAL, 2002, 28 (03) : 319 - 326
  • [34] PREPARATION OF SULFOALUMINATE BELITE CEMENT FROM FLY-ASH
    SAHU, S
    MAJLING, J
    [J]. CEMENT AND CONCRETE RESEARCH, 1994, 24 (06) : 1065 - 1072
  • [35] Calcium sulfoaluminate cements - low-energy cements, special cements or what?
    Sharp, JH
    Lawrence, CD
    Yang, R
    [J]. ADVANCES IN CEMENT RESEARCH, 1999, 11 (01) : 3 - 13
  • [36] Calcium sulphoaluminate cements made with phosphogypsum: Production issues and material properties
    Shen, Yan
    Qian, Jueshi
    Chai, Junqing
    Fan, Yunyan
    [J]. CEMENT & CONCRETE COMPOSITES, 2014, 48 : 67 - 74
  • [37] Phase compositions and equilibria in the CaO-Al2O3-Fe2O3-SO3 system, for assemblages containing ye'elimite and ferrite Ca2(Al,Fe)O5
    Touzo, Bruno
    Scrivener, Karen L.
    Glasser, Frederic P.
    [J]. CEMENT AND CONCRETE RESEARCH, 2013, 54 : 77 - 86
  • [38] Calorimetric and thermogravimetric study on the influence of calcium sulfate on the hydration of ye'elimite
    Winnefeld, Frank
    Barlag, Stefan
    [J]. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2010, 101 (03) : 949 - 957